Here is a couple of articles I found on using electricity on snake bites. http://www.sabramsmd.com/brs/brs_lancet.html http://groups.yahoo.com/group/tt-forum/message/102
-----Original Message-----
From: Jack Milliorn [mailto:[email protected]]
Sent: Wed 10/22/2003 2:45 PM
To: [email protected]
Cc:
Subject: Re: cs>brown recluse spider bite
Whoa....I never heard of using Zappers for snake venom. I'm not sure
how that would work since the Zappers purpose is the kill organic living things
like parasites. Is snake venom parasitic? I don't think so.
Jack
----- Original Message -----
From: sol <mailto:[email protected]>
To: [email protected]
Sent: Wednesday, October 22, 2003 10:55 AM
Subject: Re: cs>brown recluse spider bite
If you can find out what current and voltage is used in the
electrical zappers used for snake venom in India, that might give you good
info. I have not been able to find anything though (I do terrible searches!)
paula
----- Original Message -----
From: tbass <mailto:[email protected]>
To: [email protected]
Sent: Wednesday, October 22, 2003 12:08 AM
Subject: Re: cs>brown recluse spider bite
CS Gang,
Does anyone know what kind of minimal voltage
applied to the bite will break down spider venom?
I can't see many folks grabbing onto running
automotive sparkplug wires willingly. Or zapping
themselves with a stun gun..!!
Are we talking microamp currents here? The average
person starts to feel voltage tingles at around 40
volts
(depending upon skin resistance) indicating to me there
is
some current flow at this voltage level. Think this is
enough to do the neutralizing job?
Any knowledgeable comments..??
Tom Bassett
----- Original Message -----
From: "Dan Nave" <[email protected]>
To: <[email protected]>
Sent: Tuesday, October 21, 2003 1:56 PM
Subject: Re: cs>brown recluse spider bite
> If a 5-9 volt wall wart will work, then a 9 volt
battery will work.
> Just hold the battery terminals on the skin with the
bite between them.
> The terminals should have about the right spacing. I
just wonder if
> you would have to do something to reduce the skin
resistance a bit.
>
> Dan
>
>
> Re: cs>brown recluse spider bite
>
> From: Duncan Crow (view other messages by this
author)
> Date: Mon, 20 Oct 2003 17:06:12
>
> Electricity will break toxins. Use something like a
herpes zapper
> or a wall wart with about 1-5 mA current and about
5-9 volts. A
> Beck blood electrifier works very well if you have
one, but a Clark
> zapper probably lacks the power needed.
>
> Duncan Crow
>
> > Could anyone tell me how to neutralize the toxins
from a brown
> > recluse spider bite? My husband has been bitten at
least once, but
> > has multiple erruptions that keep occurring every
few days. He has
> > a couple that have healed, one that is pretty bad,
one that is just
> > starting to get sore. Thanks for any advise.
> >
> > Becky
>
>
>
>
>
> --
> The silver-list is a moderated forum for discussion
of colloidal silver.
>
> Instructions for unsubscribing may be found at:
http://silverlist.org
>
> To post, address your message to:
[email protected]
>
> Silver-list archive:
http://escribe.com/health/thesilverlist/index.html
>
> List maintainer: Mike Devour <[email protected]>
>
>
<<winmail.dat>>
