Hi Raine, Well I havent timed it much, but I image somewhere between 2 to 4 hours sometimes longer. I just go by how often I have to clean and occasionally I check it with the TDS meter. Each batch varies with time and strength
Take care, V > Thank so much, V. It's good to know that others have this fuzz issue. > How long do you brew? > -Raine > V wrote: >>Hi Raine, >> >>Yes that is normal. I clean my rods more often than that. they bulid >>up fuzz faster as the concentration goes up. Agter several hours you cant >>clean them fast enough nad then I stop the precess, it makse me very >>strang CS that is totally clear. and lasts a long time in the cupboard, >>it never turns grey or golden. I jsut use two 99.999 siver rods of 12 >>gauge and have it connected to a 30 volt DC wall wart, and I bubble air >>through the water while it going. I have made it as high as 53 ppm >>measured with a Hanna TDS meter, mostly though it comes out between 25 >>and 30 ppm. I make it in a 32 Oz jar also. using Kmart distilled water >>that measures 1 PPM when I start. >> >>the bubbling provides stirring so that the concentration aronud the >>electrodes remains even with the surronuding water all the time. I >>imagine tha has a simialar effect on the process, as a constant current >>device, by not letting too much conduction happen in the immediate area >>of the electrodes. thats my theory about it anyway. >> >>Take care, >> V >> >> -- -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
