Here are some log file entries that appear relevant to me: "2009-11-20T20:08:02.577000Z":5:OUTGOING:INFO:nshpbx1.sipx.voip:main:00000000:sipXbridge:"Sent SIP Message :\n----Remote Host:172.30.209.62---- Port: 5070----\nREGISTER sip:pcelbcn0001.munged.munged.com:5070 SIP/2.0\r\nCall-ID: 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 REGISTER\r\nFrom: <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: <sip:1...@pcelbcn0001.munged.munged.com>\r\nVia: SIP/2.0/UDP pcelbcn0001.munged.munged.com:5060;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nMax-Forwards: 70\r\nUser-Agent: sipXecs/4.0.4 sipXecs/sipxbridge (Linux)\r\nAllow: INVITE,BYE,ACK,CANCEL,OPTIONS\r\nRoute: <sip:172.30.209.62:5070;transport=udp;lr>\r\nContact: <sip:1...@pcelbcn0001.munged.munged.com:5060;transport=udp>\r\nExpires: 600\r\nContent-Length: 0\r\n\r\n--------------------END--------------------\n" "2009-11-20T20:08:02.613000Z":6:INCOMING:INFO:nshpbx1.sipx.voip:Thread-13:00000000:sipXbridge:"Read SIP Message :\n----Remote Host:172.30.209.62---- Port: 5070----\nSIP/2.0 403 Forbidden\r\nVia: SIP/2.0/UDP pcelbcn0001.munged.munged.com:5060;received=10.87.20.5;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nCall-ID: 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 REGISTER\r\nFrom: <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: <sip:1...@pcelbcn0001.munged.munged.com>;tag=aprqngfrt-gjiai91000020\r\nContent-Length: 0\r\n\r\n====================END====================\n" <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!DOCTYPE log SYSTEM "logger.dtd"> <log> </log> "2009-11-20T20:08:12.601000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv2Hello" "2009-11-20T20:08:12.602000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv3" "2009-11-20T20:08:12.602000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = TLSv1" "2009-11-20T20:08:12.683000Z":4:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:sipXbridge:"gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1080) [Invalid argument address = 10.87.20.5 port = 5060 transport = udp]" "2009-11-20T20:08:12.686000Z":5:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:Gateway:"Cannot initialize gateway" javax.sip.InvalidArgumentException: Address already in use
mkitchin.pub...@gmail.com wrote: > This was an inevitable question from me. I need some help connecting > to Verizon SIP over a private DS3. There is no firewall or NAT > involved. The information they gave me is below. > > From Verizon: > Inbound calls will route from the 172.30.9.0/24 port 5060 network and > you should be able to ping 172.30.9.1. This is the only address you > will be able to ping for security reasons. > For outbound calls please configure the SIP target (to the VzB > network) to one of the settings below. > IP: 172.30.209.62 port: 5070 > OR > FQDN: pcelbcn0001.munged.munged.com > > I'm using the sipexec server as the SBC. It is at 10.87.20.5. I have > tried to translate this into all the correct fields on the > configuration guide here: > http://sipx-wiki.calivia.com/index.php/SIP_Trunking_with_sipXecs:_Overview_and_Configuration > > > No matter what I try, The Sip Trunking service fails to start with the > 'Address already in use' error below. I googled several of the lines, > and I found some bug reports and other writeups that didn't appear to > relate to my problem. I cleared one other error by putting in a fake > username and password under ITSP account. I don't have an username and > password. I would assume that is because this is a private connection. > As you can see, I have received minimal information from Verizon. I > also have no NAT or firewall involved, so several of the configuration > screens regarding NAT don't really pertain to me, but I had to put in > a value of some sort. On System, Servers, NAT, Public IP address for > example, I had to put something, so I put 10.87.20.5. Verizon has > performed a miracle in their minds by simply agreeing to work with a > 'vendorless open source PBX', and we are supposed to have their > Interop test with wireshark captures on Monday. I need to do anything > possible to get this working by then. With the information I have, can > someone help me figure out exactly what values should be put where in > the various config screens? A few are obvious, but a few aren't for me > at least given give that there is no firewall, NAT or ITSP account. > > Thanks a ton, > Matthew > > javax.sip.InvalidArgumentException: Address already in use > at > gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) > > at > org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) > > > at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) > at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) > Caused by: java.io.IOException: Address already in use > at > gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) > > > at > gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) > > > at > gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) > > ... 3 more > SipXbridge : Exception caught while running > org.sipfoundry.sipxbridge.SipXbridgeException: Cannot initialize gateway > at > org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:598) > > > at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) > at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) > Caused by: javax.sip.InvalidArgumentException: Address already in use > at > gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) > > at > org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) > > > ... 2 more > Caused by: java.io.IOException: Address already in use > at > gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) > > > at > gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) > > > at > gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) > > ... 3 more _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
