Can you run: cd /var/log/sipxpbx
rm -f ./sipxbridge.log Make a test call, and post the results from sipxbridge.log If your a static configuration they are more than likely pointing to a specific address on your end. Did they say anything about that? On Nov 20, 2009, at 5:25 PM, "mkitchin.pub...@gmail.com" <mkitchin.pub...@gmail.com > wrote: > Yes. I just found that under advanced settings. that seems to have > gotten rid of that error. Thank you! I still can't make any outbound > calls, but hopefully I will be able to find some more logs showing > why. The last entries in my sipxbridge log are below. My inbound > calls from Verizon are still set from them to come in on 5060. I > have it set to 5080 at the moment so it won;t conflict with my > phones attempting to talk to the server. I assume that should only > affect inbound calls, but assuming can make an ass out of me. > > "2009-11-20T21:57:48.801000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main: > 00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv2Hello" > "2009-11-20T21:57:48.814000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main: > 00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv3" > "2009-11-20T21:57:48.814000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main: > 00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = TLSv1" > "2009-11-20T21:57:49.840000Z":4:JAVA:INFO:nshpbx1.sipx.voip:main: > 00000000:Gateway:"------- REGISTERING--------" > > > Melting Pot Technologies GMail wrote: >> Did you uncheck register on initialization? >> >> On Nov 20, 2009, at 4:24 PM, "mkitchin.pub...@gmail.com" >> <mkitchin.pub...@gmail.com >> > wrote: >> >>> In case you didn't have enough emails from me, here is a little more >>> info. I put in 123 for the username, so that is obviously where the >>> 'sip:1...@pcelbcn0001' entry is coming from. The service errors out >>> if I >>> don't put in a username and password, but Verizon isn't requesting >>> we >>> use one. >>> >>> mkitchin.pub...@gmail.com wrote: >>>> Here are some log file entries that appear relevant to me: >>>> >>>> "2009-11-20T20:08:02.577000Z": >>>> 5:OUTGOING:INFO:nshpbx1.sipx.voip:main:00000000:sipXbridge:"Sent >>>> SIP Message :\n----Remote Host:172.30.209.62---- Port: >>>> 5070----\nREGISTER sip:pcelbcn0001.munged.munged.com:5070 >>>> SIP/2.0\r\nCall-ID: >>>> 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 >>>> REGISTER\r\nFrom: >>>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r >>>> \nTo: >>>> <sip:1...@pcelbcn0001.munged.munged.com>\r\nVia: SIP/2.0/UDP >>>> pcelbcn0001.munged.munged.com: >>>> 5060;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nMax- >>>> Forwards: >>>> 70\r\nUser-Agent: sipXecs/4.0.4 sipXecs/sipxbridge (Linux)\r >>>> \nAllow: >>>> INVITE,BYE,ACK,CANCEL,OPTIONS\r\nRoute: >>>> <sip:172.30.209.62:5070;transport=udp;lr>\r\nContact: >>>> <sip:1...@pcelbcn0001.munged.munged.com:5060;transport=udp>\r >>>> \nExpires: >>>> 600\r\nContent-Length: >>>> 0\r\n\r\n--------------------END--------------------\n" >>>> "2009-11-20T20:08:02.613000Z": >>>> 6:I >>>> NCOMING:INFO:nshpbx1.sipx.voip:Thread-13:00000000:sipXbridge:"Read >>>> SIP Message :\n----Remote Host:172.30.209.62---- Port: >>>> 5070----\nSIP/2.0 403 Forbidden\r\nVia: SIP/2.0/UDP >>>> pcelbcn0001.munged.munged.com: >>>> 5060; >>>> received= >>>> 10.87.20.5;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r >>>> \nCall-ID: >>>> 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 >>>> REGISTER\r\nFrom: >>>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r >>>> \nTo: >>>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=aprqngfrt- >>>> gjiai91000020\r\nContent-Length: >>>> 0\r\n\r\n====================END====================\n" >>>> <?xml version="1.0" encoding="UTF-8" standalone="no"?> >>>> <!DOCTYPE log SYSTEM "logger.dtd"> >>>> <log> >>>> </log> >>>> "2009-11-20T20:08:12.601000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main: >>>> 00000000:SipXbridgeXmlRpcServerImpl:"Supported >>>> protocol = SSLv2Hello" >>>> "2009-11-20T20:08:12.602000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main: >>>> 00000000:SipXbridgeXmlRpcServerImpl:"Supported >>>> protocol = SSLv3" >>>> "2009-11-20T20:08:12.602000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main: >>>> 00000000:SipXbridgeXmlRpcServerImpl:"Supported >>>> protocol = TLSv1" >>>> "2009-11-20T20:08:12.683000Z":4:JAVA:ERR:nshpbx1.sipx.voip:main: >>>> 00000000: >>>> sipXbridge:"gov.nist.javax.sip.SipStackImpl.createListeningPoint >>>> (SipStackImpl.java:1080) >>>> [Invalid argument address = 10.87.20.5 port = 5060 transport = >>>> udp]" >>>> "2009-11-20T20:08:12.686000Z":5:JAVA:ERR:nshpbx1.sipx.voip:main: >>>> 00000000:Gateway:"Cannot >>>> initialize gateway" >>>> javax.sip.InvalidArgumentException: Address already in use >>>> >>>> >>>> mkitchin.pub...@gmail.com wrote: >>>>> This was an inevitable question from me. I need some help >>>>> connecting >>>>> to Verizon SIP over a private DS3. There is no firewall or NAT >>>>> involved. The information they gave me is below. >>>>> >>>>> From Verizon: >>>>> Inbound calls will route from the 172.30.9.0/24 port 5060 >>>>> network and >>>>> you should be able to ping 172.30.9.1. This is the only address >>>>> you >>>>> will be able to ping for security reasons. >>>>> For outbound calls please configure the SIP target (to the VzB >>>>> network) to one of the settings below. >>>>> IP: 172.30.209.62 port: 5070 >>>>> OR >>>>> FQDN: pcelbcn0001.munged.munged.com >>>>> >>>>> I'm using the sipexec server as the SBC. It is at 10.87.20.5. I >>>>> have >>>>> tried to translate this into all the correct fields on the >>>>> configuration guide here: >>>>> http://sipx-wiki.calivia.com/index.php/SIP_Trunking_with_sipXecs:_Overview_and_Configuration >>>>> >>>>> No matter what I try, The Sip Trunking service fails to start with >>>>> the 'Address already in use' error below. I googled several of the >>>>> lines, and I found some bug reports and other writeups that didn't >>>>> appear to relate to my problem. I cleared one other error by >>>>> putting >>>>> in a fake username and password under ITSP account. I don't have >>>>> an >>>>> username and password. I would assume that is because this is a >>>>> private connection. As you can see, I have received minimal >>>>> information from Verizon. I also have no NAT or firewall >>>>> involved, so >>>>> several of the configuration screens regarding NAT don't really >>>>> pertain to me, but I had to put in a value of some sort. On >>>>> System, >>>>> Servers, NAT, Public IP address for example, I had to put >>>>> something, >>>>> so I put 10.87.20.5. Verizon has performed a miracle in their >>>>> minds >>>>> by simply agreeing to work with a 'vendorless open source PBX', >>>>> and >>>>> we are supposed to have their Interop test with wireshark >>>>> captures on >>>>> Monday. I need to do anything possible to get this working by >>>>> then. >>>>> With the information I have, can someone help me figure out >>>>> exactly >>>>> what values should be put where in the various config screens? A >>>>> few >>>>> are obvious, but a few aren't for me at least given give that >>>>> there >>>>> is no firewall, NAT or ITSP account. >>>>> >>>>> Thanks a ton, >>>>> Matthew >>>>> >>>>> javax.sip.InvalidArgumentException: Address already in use >>>>> at >>>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint >>>>> (SipStackImpl.java:1083) >>>>> >>>>> at >>>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints >>>>> (Gateway.java:540) >>>>> >>>>> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >>>>> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >>>>> Caused by: java.io.IOException: Address already in use >>>>> at >>>>> gov.nist.javax.sip.stack.UDPMessageProcessor.<init> >>>>> (UDPMessageProcessor.java:130) >>>>> >>>>> at >>>>> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor( >>>>> SIPTransactionStack.java:1890) >>>>> >>>>> at >>>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint >>>>> (SipStackImpl.java:1064) >>>>> >>>>> ... 3 more >>>>> SipXbridge : Exception caught while running >>>>> org.sipfoundry.sipxbridge.SipXbridgeException: Cannot initialize >>>>> gateway >>>>> at >>>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints >>>>> (Gateway.java:598) >>>>> >>>>> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >>>>> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >>>>> Caused by: javax.sip.InvalidArgumentException: Address already >>>>> in use >>>>> at >>>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint >>>>> (SipStackImpl.java:1083) >>>>> >>>>> at >>>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints >>>>> (Gateway.java:540) >>>>> >>>>> ... 2 more >>>>> Caused by: java.io.IOException: Address already in use >>>>> at >>>>> gov.nist.javax.sip.stack.UDPMessageProcessor.<init> >>>>> (UDPMessageProcessor.java:130) >>>>> >>>>> at >>>>> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor( >>>>> SIPTransactionStack.java:1890) >>>>> >>>>> at >>>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint >>>>> (SipStackImpl.java:1064) >>>>> >>>>> ... 3 more >>>> >>> >>> _______________________________________________ >>> sipx-users mailing list sipx-users@list.sipfoundry.org >>> List Archive: http://list.sipfoundry.org/archive/sipx-users >>> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >>> sipXecs IP PBX -- http://www.sipfoundry.org/ > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
