In case you didn't have enough emails from me, here is a little more info. I put in 123 for the username, so that is obviously where the 'sip:1...@pcelbcn0001' entry is coming from. The service errors out if I don't put in a username and password, but Verizon isn't requesting we use one.
mkitchin.pub...@gmail.com wrote: > Here are some log file entries that appear relevant to me: > > "2009-11-20T20:08:02.577000Z":5:OUTGOING:INFO:nshpbx1.sipx.voip:main:00000000:sipXbridge:"Sent > > SIP Message :\n----Remote Host:172.30.209.62---- Port: > 5070----\nREGISTER sip:pcelbcn0001.munged.munged.com:5070 > SIP/2.0\r\nCall-ID: > 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 > REGISTER\r\nFrom: > <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: > <sip:1...@pcelbcn0001.munged.munged.com>\r\nVia: SIP/2.0/UDP > pcelbcn0001.munged.munged.com:5060;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nMax-Forwards: > > 70\r\nUser-Agent: sipXecs/4.0.4 sipXecs/sipxbridge (Linux)\r\nAllow: > INVITE,BYE,ACK,CANCEL,OPTIONS\r\nRoute: > <sip:172.30.209.62:5070;transport=udp;lr>\r\nContact: > <sip:1...@pcelbcn0001.munged.munged.com:5060;transport=udp>\r\nExpires: > 600\r\nContent-Length: > 0\r\n\r\n--------------------END--------------------\n" > "2009-11-20T20:08:02.613000Z":6:INCOMING:INFO:nshpbx1.sipx.voip:Thread-13:00000000:sipXbridge:"Read > > SIP Message :\n----Remote Host:172.30.209.62---- Port: > 5070----\nSIP/2.0 403 Forbidden\r\nVia: SIP/2.0/UDP > pcelbcn0001.munged.munged.com:5060;received=10.87.20.5;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nCall-ID: > > 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 > REGISTER\r\nFrom: > <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: > <sip:1...@pcelbcn0001.munged.munged.com>;tag=aprqngfrt-gjiai91000020\r\nContent-Length: > > 0\r\n\r\n====================END====================\n" > <?xml version="1.0" encoding="UTF-8" standalone="no"?> > <!DOCTYPE log SYSTEM "logger.dtd"> > <log> > </log> > "2009-11-20T20:08:12.601000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported > > protocol = SSLv2Hello" > "2009-11-20T20:08:12.602000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported > > protocol = SSLv3" > "2009-11-20T20:08:12.602000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported > > protocol = TLSv1" > "2009-11-20T20:08:12.683000Z":4:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:sipXbridge:"gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1080) > > [Invalid argument address = 10.87.20.5 port = 5060 transport = udp]" > "2009-11-20T20:08:12.686000Z":5:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:Gateway:"Cannot > > initialize gateway" > javax.sip.InvalidArgumentException: Address already in use > > > mkitchin.pub...@gmail.com wrote: >> This was an inevitable question from me. I need some help connecting >> to Verizon SIP over a private DS3. There is no firewall or NAT >> involved. The information they gave me is below. >> >> From Verizon: >> Inbound calls will route from the 172.30.9.0/24 port 5060 network and >> you should be able to ping 172.30.9.1. This is the only address you >> will be able to ping for security reasons. >> For outbound calls please configure the SIP target (to the VzB >> network) to one of the settings below. >> IP: 172.30.209.62 port: 5070 >> OR >> FQDN: pcelbcn0001.munged.munged.com >> >> I'm using the sipexec server as the SBC. It is at 10.87.20.5. I have >> tried to translate this into all the correct fields on the >> configuration guide here: >> http://sipx-wiki.calivia.com/index.php/SIP_Trunking_with_sipXecs:_Overview_and_Configuration >> >> >> No matter what I try, The Sip Trunking service fails to start with >> the 'Address already in use' error below. I googled several of the >> lines, and I found some bug reports and other writeups that didn't >> appear to relate to my problem. I cleared one other error by putting >> in a fake username and password under ITSP account. I don't have an >> username and password. I would assume that is because this is a >> private connection. As you can see, I have received minimal >> information from Verizon. I also have no NAT or firewall involved, so >> several of the configuration screens regarding NAT don't really >> pertain to me, but I had to put in a value of some sort. On System, >> Servers, NAT, Public IP address for example, I had to put something, >> so I put 10.87.20.5. Verizon has performed a miracle in their minds >> by simply agreeing to work with a 'vendorless open source PBX', and >> we are supposed to have their Interop test with wireshark captures on >> Monday. I need to do anything possible to get this working by then. >> With the information I have, can someone help me figure out exactly >> what values should be put where in the various config screens? A few >> are obvious, but a few aren't for me at least given give that there >> is no firewall, NAT or ITSP account. >> >> Thanks a ton, >> Matthew >> >> javax.sip.InvalidArgumentException: Address already in use >> at >> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) >> >> at >> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) >> >> >> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >> Caused by: java.io.IOException: Address already in use >> at >> gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) >> >> >> at >> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) >> >> >> at >> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) >> >> ... 3 more >> SipXbridge : Exception caught while running >> org.sipfoundry.sipxbridge.SipXbridgeException: Cannot initialize gateway >> at >> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:598) >> >> >> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >> Caused by: javax.sip.InvalidArgumentException: Address already in use >> at >> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) >> >> at >> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) >> >> >> ... 2 more >> Caused by: java.io.IOException: Address already in use >> at >> gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) >> >> >> at >> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) >> >> >> at >> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) >> >> ... 3 more > _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
