Yes. I just found that under advanced settings. that seems to have gotten rid of that error. Thank you! I still can't make any outbound calls, but hopefully I will be able to find some more logs showing why. The last entries in my sipxbridge log are below. My inbound calls from Verizon are still set from them to come in on 5060. I have it set to 5080 at the moment so it won;t conflict with my phones attempting to talk to the server. I assume that should only affect inbound calls, but assuming can make an ass out of me.
"2009-11-20T21:57:48.801000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv2Hello" "2009-11-20T21:57:48.814000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = SSLv3" "2009-11-20T21:57:48.814000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported protocol = TLSv1" "2009-11-20T21:57:49.840000Z":4:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:Gateway:"------- REGISTERING--------" Melting Pot Technologies GMail wrote: > Did you uncheck register on initialization? > > On Nov 20, 2009, at 4:24 PM, "mkitchin.pub...@gmail.com" > <mkitchin.pub...@gmail.com> wrote: > >> In case you didn't have enough emails from me, here is a little more >> info. I put in 123 for the username, so that is obviously where the >> 'sip:1...@pcelbcn0001' entry is coming from. The service errors out if I >> don't put in a username and password, but Verizon isn't requesting we >> use one. >> >> mkitchin.pub...@gmail.com wrote: >>> Here are some log file entries that appear relevant to me: >>> >>> "2009-11-20T20:08:02.577000Z":5:OUTGOING:INFO:nshpbx1.sipx.voip:main:00000000:sipXbridge:"Sent >>> >>> >>> SIP Message :\n----Remote Host:172.30.209.62---- Port: >>> 5070----\nREGISTER sip:pcelbcn0001.munged.munged.com:5070 >>> SIP/2.0\r\nCall-ID: >>> 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 >>> REGISTER\r\nFrom: >>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: >>> <sip:1...@pcelbcn0001.munged.munged.com>\r\nVia: SIP/2.0/UDP >>> pcelbcn0001.munged.munged.com:5060;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nMax-Forwards: >>> >>> >>> 70\r\nUser-Agent: sipXecs/4.0.4 sipXecs/sipxbridge (Linux)\r\nAllow: >>> INVITE,BYE,ACK,CANCEL,OPTIONS\r\nRoute: >>> <sip:172.30.209.62:5070;transport=udp;lr>\r\nContact: >>> <sip:1...@pcelbcn0001.munged.munged.com:5060;transport=udp>\r\nExpires: >>> 600\r\nContent-Length: >>> 0\r\n\r\n--------------------END--------------------\n" >>> "2009-11-20T20:08:02.613000Z":6:INCOMING:INFO:nshpbx1.sipx.voip:Thread-13:00000000:sipXbridge:"Read >>> >>> >>> SIP Message :\n----Remote Host:172.30.209.62---- Port: >>> 5070----\nSIP/2.0 403 Forbidden\r\nVia: SIP/2.0/UDP >>> pcelbcn0001.munged.munged.com:5060;received=10.87.20.5;branch=z9hG4bK4bc3200f1f2720efc3aa25861a8eaa62333134\r\nCall-ID: >>> >>> >>> 8d16619b30dd4006b74d20218ff1d...@10.87.20.5\r\ncseq: 1 >>> REGISTER\r\nFrom: >>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=425578349234274908\r\nTo: >>> <sip:1...@pcelbcn0001.munged.munged.com>;tag=aprqngfrt-gjiai91000020\r\nContent-Length: >>> >>> >>> 0\r\n\r\n====================END====================\n" >>> <?xml version="1.0" encoding="UTF-8" standalone="no"?> >>> <!DOCTYPE log SYSTEM "logger.dtd"> >>> <log> >>> </log> >>> "2009-11-20T20:08:12.601000Z":1:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported >>> >>> >>> protocol = SSLv2Hello" >>> "2009-11-20T20:08:12.602000Z":2:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported >>> >>> >>> protocol = SSLv3" >>> "2009-11-20T20:08:12.602000Z":3:JAVA:INFO:nshpbx1.sipx.voip:main:00000000:SipXbridgeXmlRpcServerImpl:"Supported >>> >>> >>> protocol = TLSv1" >>> "2009-11-20T20:08:12.683000Z":4:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:sipXbridge:"gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1080) >>> >>> >>> [Invalid argument address = 10.87.20.5 port = 5060 transport = udp]" >>> "2009-11-20T20:08:12.686000Z":5:JAVA:ERR:nshpbx1.sipx.voip:main:00000000:Gateway:"Cannot >>> >>> >>> initialize gateway" >>> javax.sip.InvalidArgumentException: Address already in use >>> >>> >>> mkitchin.pub...@gmail.com wrote: >>>> This was an inevitable question from me. I need some help connecting >>>> to Verizon SIP over a private DS3. There is no firewall or NAT >>>> involved. The information they gave me is below. >>>> >>>> From Verizon: >>>> Inbound calls will route from the 172.30.9.0/24 port 5060 network and >>>> you should be able to ping 172.30.9.1. This is the only address you >>>> will be able to ping for security reasons. >>>> For outbound calls please configure the SIP target (to the VzB >>>> network) to one of the settings below. >>>> IP: 172.30.209.62 port: 5070 >>>> OR >>>> FQDN: pcelbcn0001.munged.munged.com >>>> >>>> I'm using the sipexec server as the SBC. It is at 10.87.20.5. I have >>>> tried to translate this into all the correct fields on the >>>> configuration guide here: >>>> http://sipx-wiki.calivia.com/index.php/SIP_Trunking_with_sipXecs:_Overview_and_Configuration >>>> >>>> >>>> >>>> No matter what I try, The Sip Trunking service fails to start with >>>> the 'Address already in use' error below. I googled several of the >>>> lines, and I found some bug reports and other writeups that didn't >>>> appear to relate to my problem. I cleared one other error by putting >>>> in a fake username and password under ITSP account. I don't have an >>>> username and password. I would assume that is because this is a >>>> private connection. As you can see, I have received minimal >>>> information from Verizon. I also have no NAT or firewall involved, so >>>> several of the configuration screens regarding NAT don't really >>>> pertain to me, but I had to put in a value of some sort. On System, >>>> Servers, NAT, Public IP address for example, I had to put something, >>>> so I put 10.87.20.5. Verizon has performed a miracle in their minds >>>> by simply agreeing to work with a 'vendorless open source PBX', and >>>> we are supposed to have their Interop test with wireshark captures on >>>> Monday. I need to do anything possible to get this working by then. >>>> With the information I have, can someone help me figure out exactly >>>> what values should be put where in the various config screens? A few >>>> are obvious, but a few aren't for me at least given give that there >>>> is no firewall, NAT or ITSP account. >>>> >>>> Thanks a ton, >>>> Matthew >>>> >>>> javax.sip.InvalidArgumentException: Address already in use >>>> at >>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) >>>> >>>> >>>> >>>> at >>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) >>>> >>>> >>>> >>>> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >>>> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >>>> Caused by: java.io.IOException: Address already in use >>>> at >>>> gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) >>>> >>>> >>>> >>>> at >>>> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) >>>> >>>> >>>> >>>> at >>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) >>>> >>>> >>>> >>>> ... 3 more >>>> SipXbridge : Exception caught while running >>>> org.sipfoundry.sipxbridge.SipXbridgeException: Cannot initialize >>>> gateway >>>> at >>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:598) >>>> >>>> >>>> >>>> at org.sipfoundry.sipxbridge.Gateway.start(Gateway.java:1000) >>>> at org.sipfoundry.sipxbridge.Gateway.main(Gateway.java:1353) >>>> Caused by: javax.sip.InvalidArgumentException: Address already in use >>>> at >>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1083) >>>> >>>> >>>> >>>> at >>>> org.sipfoundry.sipxbridge.Gateway.initializeSipListeningPoints(Gateway.java:540) >>>> >>>> >>>> >>>> ... 2 more >>>> Caused by: java.io.IOException: Address already in use >>>> at >>>> gov.nist.javax.sip.stack.UDPMessageProcessor.<init>(UDPMessageProcessor.java:130) >>>> >>>> >>>> >>>> at >>>> gov.nist.javax.sip.stack.SIPTransactionStack.createMessageProcessor(SIPTransactionStack.java:1890) >>>> >>>> >>>> >>>> at >>>> gov.nist.javax.sip.SipStackImpl.createListeningPoint(SipStackImpl.java:1064) >>>> >>>> >>>> >>>> ... 3 more >>> >> >> _______________________________________________ >> sipx-users mailing list sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users >> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >> sipXecs IP PBX -- http://www.sipfoundry.org/ _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
