This sipXecs install is brand new.  We are just testing sipXecs out to see if 
it fits our needs.  ALL users are using eyeBeam 1.5.19.x softphones from 
CounterPath.  We are not purchasing any hard phones with this system until we 
see it work with current setup.  The ITSP we are using is Flowroute - they give 
you .25 to trial their service thus it is what we are using with sipXecs.  I am 
not having to enter 5060 for Flowroute's service.  The ITSP works fine.  What 
does not work is direct extension calls with outside softphones until I remove 
the default sipXBridge-1 and use a test bridge.

--- On Sat, 11/21/09, Tony Graziano <tgrazi...@myitdepartment.net> wrote:

> From: Tony Graziano <tgrazi...@myitdepartment.net>
> Subject: Re: [sipx-users] sipX Bridge
> To: jordan.turner1...@yahoo.com, sipx-users@list.sipfoundry.org
> Date: Saturday, November 21, 2009, 2:37 AM
> What phones are the remote workers
> using? Are they dialing the itsp did
> number or the internal line number? Can you provide a call
> trace?
> 
> I'm also curious why this is happening with an itsp. I am
> going to assume
> the itsp is not configured for port 5060 also is it?
> ============================
> Tony Graziano, Manager
> Telephone: 434.984.8430
> Fax: 434.984.8431
> 
> Email: tgrazi...@myitdepartment.net
> 
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> Fax: 434.984.8427
> 
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
> 
> ----- Original Message -----
> From: Jordan Turner <jordan.turner1...@yahoo.com>
> To: sipx-users@list.sipfoundry.org
> <sipx-users@list.sipfoundry.org>;
> Tony
> Graziano <tgrazi...@myitdepartment.net>
> Sent: Fri Nov 20 21:32:16 2009
> Subject: Re: [sipx-users] sipX Bridge
> 
> Yes, system informed of the update and automatically
> installed when I
> approved.
> 
> --- On Sat, 11/21/09, Tony Graziano <tgrazi...@myitdepartment.net>
> wrote:
> 
> > From: Tony Graziano <tgrazi...@myitdepartment.net>
> > Subject: Re: [sipx-users] sipX Bridge
> > To: jordan.turner1...@yahoo.com,
> sipx-users@list.sipfoundry.org
> > Date: Saturday, November 21, 2009, 2:24 AM
> > Have you updated to 4.0.4 yet?
> > ============================
> > Tony Graziano, Manager
> > Telephone: 434.984.8430
> > Fax: 434.984.8431
> >
> > Email: tgrazi...@myitdepartment.net
> >
> > LAN/Telephony/Security and Control Systems Helpdesk:
> > Telephone: 434.984.8426
> > Fax: 434.984.8427
> >
> > Helpdesk Contract Customers:
> > http://www.myitdepartment.net/gethelp/
> >
> > ----- Original Message -----
> > From: sipx-users-boun...@list.sipfoundry.org
> > <sipx-users-boun...@list.sipfoundry.org>
> > To: sipx-users@list.sipfoundry.org
> > <sipx-users@list.sipfoundry.org>
> > Sent: Fri Nov 20 21:13:50 2009
> > Subject: [sipx-users] sipX Bridge
> >
> > Do I have to use the default sipxBridge-1 SBC that
> gets
> > created when you
> > enable the SIP Trunk role?  This works fine when
> using
> > a SIP Trunk provider,
> > but I can not use it properly for  external
> clients
> > trying to reach each
> > other that are outside the Intranet unless I delete
> the
> > default sipXBridge-1
> > and create a new one.  When I do that, then my
> SIP
> > Trunk provider does not
> > work.
> >
> > Does everyoine just use this default sipXBridge-1 or
> are
> > you suppose to
> > create new SBC?
> >
> > Can you guys have two ip phones outside the company
> make
> > both extension to
> > extension call AND SIP Trunk calls to a provider at
> same
> > time?  I know I
> > can't.  Yes, I have gone through the sip trunk
> guide
> > on the wiki.
> >
> >
> >
> >
> > _______________________________________________
> > sipx-users mailing list sipx-users@list.sipfoundry.org
> > List Archive: http://list.sipfoundry.org/archive/sipx-users
> > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> > sipXecs IP PBX -- http://www.sipfoundry.org/
> >
> 


      
_______________________________________________
sipx-users mailing list sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
sipXecs IP PBX -- http://www.sipfoundry.org/

Reply via email to