On Thu, 2010-03-11 at 07:46 -0600, Robert B wrote: > Scott, > > I'd be curious if you could enlighten us regarding the following...
if you promise not to top-post to the list any more :-) > When I place a call and the remote end terminates completely via SIP > (this happens more and more often), the receiving end shows both my CID > number as well as "sipXbridge" as the caller. I'd need to see a call trace to have any real opinion on what's happening. There are three or four fields in a SIP INVITE that the receiving phone might pick values from to put on the display. Which one is chosen depends on the rules used by the receiving phone, and what value it has depends on what the various intermediate systems have done to it. In the case of SIP trunk connections, these choices also interact with the rules that the provider makes about how requests should be constructed in order to be accepted by the provider. Providers differ in this, and there are a bunch of settings in sipXbridge that affect it. > When I call internally, obviously my name is used. Then the phone you're using internally is displaying the Display Name portion of the From header. > Is there a way to configure the "sipXbridge" string through the UI? It > would be great if it could send my business name or be overridden to > send user names similar to how CID numbers are configured today. Same > set of rules. I'm not sure (and my memory is further confused by whether or not it has changed from 4.0.4 to the current development builds). _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
