On 6/22/2010 6:12 AM, Picher, Michael wrote: > Josh, > > I think when I do it I just create a new gateway and use the ip but give > it a different gateway name in sipX. > > I'm pretty sure that works fine. > > Mike > > -----Original Message----- > From: sipx-users-boun...@list.sipfoundry.org > [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Josh Patten > Sent: Monday, June 21, 2010 4:09 PM > To: sipx-users@list.sipfoundry.org > Subject: Re: [sipx-users] Use one IP address for multiple gateways in > sipX? > > Yes I did: Two different A records (not CNAMEs). I set a different > branch for each gateway and made sure the "shared" checkbox was not > checked. The way my system is currently set up is I have one main > "shared" Audiocodes mediant 1000 with a PRI connection to the outside > world. In the dial plan I put all the non-shared gateways that sipX > should try before the main shared gateway (for location based dialing) > in the dial plan order and then add the non-shared "emergency dial" > gateways (in the event the main gateway is down) after the shared > gateway in the dial plan order. > Speaking of emergency dial... It would be nice if the emergency dial plan had a outbound CID override setting. It appears that e911 (at least with voip.ms) works off the caller ID.
-- Regards -------------------------------------- Gerald Drouillard Technology Architect Drouillard & Associates, Inc. http://www.Drouillard.biz _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users sipXecs IP PBX -- http://www.sipfoundry.org/
