Yea, I think L is the rev you want on these and rev K doesn't work (or it was the other way around)...
Check the hardware rev on the back of the non-working phones. On Mon, Feb 21, 2011 at 10:09 PM, Todd Hodgen <[email protected]> wrote: > Is it possible Polycom has determined which batches are defective? If they > have, you can tell by the date code on the side of the box most likely. I > had that with a batch of 550s that had to be pulled prior to installation. > It was a simple process - had the phones in a few days. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Josh M. > Patten > Sent: Monday, February 21, 2011 8:06 PM > To: Discussion list for users of sipXecs software > Subject: Re: [sipx-users] Polycom 450 PoE issue > > Crap....looks like I get to pull all of these out of the boxes tomorrow and > test every single one. > > It amazes me a problem like this got past QA > ________________________________________ > From: [email protected] > [[email protected]] on behalf of Jim Canfield > [[email protected]] > Sent: Monday, February 21, 2011 9:42 PM > To: Discussion list for users of sipXecs software > Subject: Re: [sipx-users] Polycom 450 PoE issue > > On Mon, Feb 21, 2011 at 6:46 PM, Josh M. Patten <[email protected]> > wrote: > > I've never had this issue before until this recent shipment of 450's I > got. The first two I tried would boot up just fine the first >time you > plugged them in, then if you unplugged them and tried to plug them back in > PoE would cease to function, even using >an injector failed to power the > phone up. I'm hoping the whole shipment isn't faulty otherwise Polycom will > be replacing a >whole bunch of stuff and my deployment will probably be set > back by weeks... > > Yep, same problem on a recent shipment. Never had an issue until now. > Lost PoE on 7 of them. However, I could still power them with a power > adapter. > > ...That reminds me, I better get those RMA's submitted. > > --Jim > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users/ > -- There are 10 kinds of people in this world, those who understand binary and those who don't. [email protected] blog: http://www.sipxecs.info call: sip:[email protected]
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users/
