I do not see any downside to using 3.2.6 so far. On Nov 29, 2011 7:59 PM, "Melcon Moraes" <mel...@gmail.com> wrote:
> So, is the 3.2.6 a better option for sipx 4.4? > > - > MM > > On Mon, Nov 7, 2011 at 15:42, Tony Graziano > <tgrazi...@myitdepartment.net>wrote: > >> It seems as though Polycom fixed this in 3.2.6, my original >> troubleshooting was not using this version. I think it may also have >> fixed ringbacks for blf when using efk alss, I should know later >> today. >> >> On Fri, Nov 4, 2011 at 3:33 PM, Tony Graziano >> <tgrazi...@myitdepartment.net> wrote: >> > load efk and see what happens >> > >> > On Nov 4, 2011 2:03 PM, "Michael Picher" <mpic...@ezuce.com> wrote: >> >> >> >> I just did it like 4 times on and off hold, inbound from wireless >> phone to >> >> voip.ms trunk terminated on sipXbridge to a remote phone coming in >> from >> >> remote NAT. >> >> Polycom firmware 3.2.4b, bootrom 4.3.1, latest build. >> >> Mike >> >> >> >> On Fri, Nov 4, 2011 at 1:38 PM, Paul Curtis <pcur...@uws.edu> wrote: >> >>> >> >>> This also occurred while using Cisco 2811 gateways. The Polycom does >> not >> >>> respond correctly when initiating the Hold, it does not send a PRACK >> when it >> >>> should. I had worked with polycom on this issue earlier this year >> and they >> >>> gave me a patched version that they still have not released which is >> >>> 3.2.5.b. Seems to be coming up more and more on this list. >> >>> >> >>> >> >>> >> >>> From: sipx-users-boun...@list.sipfoundry.org >> >>> [mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Tony >> Graziano >> >>> Sent: Friday, November 04, 2011 10:09 AM >> >>> To: Discussion list for users of sipXecs software >> >>> Subject: Re: [sipx-users] Hold BUG on 4.4 using HOLD on Polycom phones >> >>> >> >>> >> >>> >> >>> ok. I will see if I can reproduce in the lab and submit a tracker. >> >>> >> >>> On Nov 4, 2011 12:46 PM, "Kevin George" <kevincgeo...@gmail.com> >> wrote: >> >>> >> >>> Sounds almost exactly like the issue I described in July. In my >> >>> situation when I put the (sip trunk) caller on hold, then resume, >> then hold >> >>> again, then resume the call messes up everytime. If I remove the moh >> config >> >>> from the polycom config manually, the problem doesn't occur. >> >>> >> >>> I'm still running the old version though. (sipxproxy-4.4.0-235.g353d7) >> >>> Bandwidth.com sip trunks >> >>> Polycom 550 3.2.4b and 3.2.5 >> >>> >> >>> I do see the ~mh~ entries in my CDR stuck also. >> >>> >> >>> On Fri, Nov 4, 2011 at 8:50 AM, Tony Graziano >> >>> <tgrazi...@myitdepartment.net> wrote: >> >>> >> >>> Numerous firmware/bootrom versions, what I am seeing is using 4.4 >> >>> (latest) if someone calls in via siptrunk on internal, and puts the >> >>> caller on hold (using the hold button) then resumes the call, the >> >>> calls is stuck in CDR as ~mh~ while the call is resumed. Occasionally, >> >>> the call cannot be resumed, and the phones start locking up and have >> >>> to be unplugged. >> >>> >> >>> It's odd the calls stuck in CDR showing ~mh~ happens and sometimes the >> >>> call is actually stuck in the media server too. >> >>> >> >>> This only started happening when putting on the last update. >> >>> (2011-10-12). Can anyone else duplicate this? >> >>> >> >>> -- >> >>> ====================== >> >>> Tony Graziano, Manager >> >>> Telephone: 434.984.8430 >> >>> sip: tgrazi...@voice.myitdepartment.net >> >>> Fax: 434.465.6833 >> >>> >> >>> Email: tgrazi...@myitdepartment.net >> >>> >> >>> LAN/Telephony/Security and Control Systems Helpdesk: >> >>> Telephone: 434.984.8426 >> >>> sip: helpd...@voice.myitdepartment.net >> >>> >> >>> Helpdesk Customers: http://myhelp.myitdepartment.net >> >>> Blog: http://blog.myitdepartment.net >> >>> >> >>> Linked-In Profile: >> >>> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> >>> Ask about our Internet Fax services! >> >>> _______________________________________________ >> >>> sipx-users mailing list >> >>> sipx-users@list.sipfoundry.org >> >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>> >> >>> >> >>> -- >> >>> Kevin George >> >>> >> >>> _______________________________________________ >> >>> sipx-users mailing list >> >>> sipx-users@list.sipfoundry.org >> >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >>> >> >>> _______________________________________________ >> >>> sipx-users mailing list >> >>> sipx-users@list.sipfoundry.org >> >>> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> >> >> >> >> >> >> >> -- >> >> Michael Picher, Director of Technical Services >> >> eZuce, Inc. >> >> >> >> 300 Brickstone Square >> >> >> >> Suite 201 >> >> >> >> Andover, MA. 01810 >> >> >> >> O.978-296-1005 X2015 >> >> M.207-956-0262 >> >> @mpicher <http://twitter.com/mpicher> >> >> www.ezuce.com >> >> >> >> >> >> _______________________________________________ >> >> sipx-users mailing list >> >> sipx-users@list.sipfoundry.org >> >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > >> >> >> >> -- >> ====================== >> Tony Graziano, Manager >> Telephone: 434.984.8430 >> sip: tgrazi...@voice.myitdepartment.net >> Fax: 434.465.6833 >> >> Email: tgrazi...@myitdepartment.net >> >> LAN/Telephony/Security and Control Systems Helpdesk: >> Telephone: 434.984.8426 >> sip: helpd...@voice.myitdepartment.net >> >> Helpdesk Customers: http://myhelp.myitdepartment.net >> Blog: http://blog.myitdepartment.net >> >> Linked-In Profile: >> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >> Ask about our Internet Fax services! >> _______________________________________________ >> sipx-users mailing list >> sipx-users@list.sipfoundry.org >> List Archive: http://list.sipfoundry.org/archive/sipx-users/ >> > > > _______________________________________________ > sipx-users mailing list > sipx-users@list.sipfoundry.org > List Archive: http://list.sipfoundry.org/archive/sipx-users/ >
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/