On Thu, Apr 5, 2012 at 2:10 PM, Tony Graziano <tgrazi...@myitdepartment.net> wrote: > 50000-50050 are the ports used for transfer. Depending on the type of ftp > client you have port 20 (active) might be needed instead of 21 (passive). > > Polycom (non eol models) are PASV clients, and vsftpd in sipx is configured > for ports 50000-50050 for data by default. Also, I typically tweak the > vsftpd.conf file to include the PASV address too. > > http://track.sipfoundry.org/browse/XX-8904
Someone call Wrigley's because you're a Life Saver. I should be able get this all included. So the address you add to vsftpd is the same address someone would need to add to sipxecs's NAT config to detect SIP REGISTRATIONs that need NAT control. If so, I'd obviously configure the system automatically with that address. _______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users/