So, if the command ifconfig successfully returns an exit code 0, I can't
explain why you got the following errors:

SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device

Can you post your local.cfg and the complete list of the kernel boot
parameters you used?

Regards,
-Andrea

John Beck wrote:
> Andrea Righi wrote:
>> John Beck wrote:
>>> start_network
>>> SIOCSIFADDR: No such device
>>> SIOCSIFNETMASK: No such device
>>> SIOCSIFBRDADDR: No such device
>>>
>>>
>>> I couldn't configure the network interface using your pre-boot settings:
>>> DEVICE: eth0
>>> IPADDR: 192.168.1.245
>>> NETMASK: 255.255.255.0
>>> BROADCAST: 192.168.1.255
>>>
>>>
>>> Killing off running processes.
>>>
>>>
>>> write_variables
>>> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>
>>>
>>> This is the SystemImager autoinstall system
>>> -------------------------------------------------------------------------------
>>>
>>>
>>>
>>>
>>> / # ifconfig eth0 192.168.1.245 netmask 255.255.255.0 up
>>> / # ping 192.168.1.1
>>> PING 192.168.1.1 (192.168.1.1): 56 data bytes
>>> 84 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=64.9 ms
>>> 84 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=3.9 ms
>>>
>>> --- 192.168.1.1 ping statistics ---
>>> 2 packets transmitted, 2 packets received, 0% packet loss
>>> round-trip min/avg/max = 3.9/34.4/64.9 ms
>>
>> Very strange... the autoinstall script issues exactly that ifconfig
>> command (except that it explicitly adds also the broadcast address).
>>
>> Can you check the return code of your ifconfig? (echo $?)
>>
>> Cheers,
>> -AndreaR
>>
>> -------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services, security?
>> Get stuff done quickly with pre-integrated technology to make your job
>> easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
>> Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> _______________________________________________
>> Sisuite-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/sisuite-users
> 
> It returns a 0
> # ifconfig eth0 192.168.1.245 netmask 255.255.255.0 up
> # echo $?
> 0
> 
> This is when I did 'echo $?' right after the script exited:
> 
> at http://systemimager.org/support/. There you can search the email list
>       archives, ask your question on IRC, or even join a mailing list to
> ask your question. There's a good chance someone else has experienced
> this very same issue and can help answer your question. If you find the
> answer and it's not in the documentation, or if you identify a bug,
> please submit a bug report at the SystemImager support page.
> 
> 
> Have fun! http://systemimager.org/team/
> 
> 
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>^M
> 
> 
>         / # echo $?                 0
> 
> 
> ------------------------------------------------------------------------
> 
> usbcore: registered new driver usbhid                                         
>  
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver                        
>  
> mice: PS/2 mouse device common for all mice                                   
>  
> input: AT Translated Set 2 keyboard on isa0060/serio0                         
>  
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1                           
>  
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27                          
>  
> NET: Registered protocol family 2                                             
>  
> IP: routing cache hash table of 512 buckets, 16Kbytes                         
>  
> TCP: Hash tables configured (established 16384 bind 4681)                     
>  
> Initializing IPsec netlink socket                                             
>  
> NET: Registered protocol family 1                                             
>  
> NET: Registered protocol family 17                                            
>  
> ACPI: (supports S0 S5)                                                        
>  
> ACPI wakeup devices:                                                          
>  
>                                                                               
>  
> md: Autodetecting RAID arrays.                                                
>  
> md: autorun ...                                                               
>  
> md: ... autorun DONE.                                                         
>  
> RAMDISK: Compressed image found at block 0                                    
>  
> VFS: Mounted root (ext2 filesystem) readonly.                                 
>  
> Freeing unused kernel memory: 140k freed                                      
>  
> init started:  BusyBox v1.1.1 (2006.10.24-09:14+0000) multi-call binary       
>  
>                                                                               
>  
> Loading tmpfs...                                                              
>  
> Didn't load -- assuming it's built into the kernel.                           
>  
>                                                                               
>  
> mount_proc                                                                    
>  
>                                                                               
>  
> switch_root_to_tmpfs                                                          
>  
>                                                                               
>  
> mount_proc                                                                    
>  
>                                                                               
>  
> mount_sys                                                                     
>  
>                                                                               
>  
> mount_pts                                                                     
>  
>                                                                               
>  
> get_arch                                                                      
>  
>                                                                               
>  
> adjust_arch                                                                   
>  
>                                                                               
>  
> ifconfig_loopback                                                             
>  
>                                                                               
>  
> load_my_modules                                                               
>  
> inserting floppy driver for 2.6.9-5.EL                                        
>  
> Floppy drive(s): fd0 is 1.44M                                                 
>  
> FDC 0 is an 82078.                                                            
>  
> Linux Tulip driver version 1.1.13 (May 11, 2002)                              
>  
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11          
>  
> tulip0:  EEPROM default media type 100baseTx-FDX.                             
>  
>                                                                               
>  
> mount_proc                                                                    
>  
>                                                                               
>  
> switch_root_to_tmpfs                                                          
>  
>                                                                               
>  
> mount_proc                                                                    
>  
>                                                                               
>  
> mount_sys                                                                     
>  
>                                                                               
>  
> mount_pts                                                                     
>  
>                                                                               
>  
> get_arch                                                                      
>  
>                                                                               
>  
> adjust_arch                                                                   
>  
>                                                                               
>  
> ifconfig_loopback                                                             
>  
>                                                                               
>  
> load_my_modules                                                               
>  
> inserting floppy driver for 2.6.9-5.EL                                        
>  
> Floppy drive(s): fd0 is 1.44M                                                 
>  
> FDC 0 is an 82078.                                                            
>  
> Linux Tulip driver version 1.1.13 (May 11, 2002)                              
>  
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11          
>  
> tulip0:  EEPROM default media type 100baseTx-FDX.                             
>  
> tulip0:  Index #0 - Media 100baseTx (#3) described by a 21140 non-MII (0) 
> block
> tulip0:  Index #1 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) 
> b
> ock.                                                                          
>  
> eth0: Digital DS21140 Tulip rev 32 at 0xd0816000, 00:03:FF:00:51:A2, IRQ 11.  
>  
> ACPI: Power Button (FF) [PWRF]                                                
>  
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]        
>  
> NET: Registered protocol family 10                                            
>  
> Disabled Privacy Extensions on device c0366c20(lo)                            
>  
> IPv6 over IPv4 tunneling driver                                               
>  
> insmod: cannot insert `/lib/modules/2.6.9-5.EL/kernel/crypto/md5.ko': File 
> exis
> s (-1): File exists                                                           
>  
> loop: loaded (max 8 devices)                                                  
>  
>                                                                               
>  
> start_udevd                                                                   
>  
> failed!                                                                       
>  
> Creating a static /dev...                                                     
>  
> done                                                                          
>  
>                                                                               
>  
> start_hotplug                                                                 
>  
> bin dev dev.tar.gz etc lib linuxrc lost+found my_modules old_root proc root 
> sbi
>  sys tmp usr var Starting hotplug subsystem...                                
>  
>                                                                               
>  
> variableize_kernel_append_parameters                                          
>  
>                                                                               
>  
> read_kernel_append_parameters                                                 
>  
> tulip0:  Index #1 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) 
> b
> ock.                                                                          
>  
> eth0: Digital DS21140 Tulip rev 32 at 0xd0816000, 00:03:FF:00:51:A2, IRQ 11.  
>  
> ACPI: Power Button (FF) [PWRF]                                                
>  
> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]        
>  
> NET: Registered protocol family 10                                            
>  
> Disabled Privacy Extensions on device c0366c20(lo)                            
>  
> IPv6 over IPv4 tunneling driver                                               
>  
> insmod: cannot insert `/lib/modules/2.6.9-5.EL/kernel/crypto/md5.ko': File 
> exis
> s (-1): File exists                                                           
>  
> loop: loaded (max 8 devices)                                                  
>  
>                                                                               
>  
> start_udevd                                                                   
>  
> failed!                                                                       
>  
> Creating a static /dev...                                                     
>  
> done                                                                          
>  
>                                                                               
>  
> start_hotplug                                                                 
>  
> bin dev dev.tar.gz etc lib linuxrc lost+found my_modules old_root proc root 
> sbi
>  sys tmp usr var Starting hotplug subsystem...                                
>  
>                                                                               
>  
> variableize_kernel_append_parameters                                          
>  
>                                                                               
>  
> read_kernel_append_parameters                                                 
>  
>                                                                               
>  
> read_local_cfg                                                                
>  
> Checking for floppy diskette.                                                 
>  
> YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL.               
>  
> Found floppy diskette.                                                        
>  
> Found /local.cfg on floppy.                                                   
>  
> Copying /local.cfg settings to /tmp/local.cfg.                                
>  
> NOTE: local.cfg settings from a floppy will override settings from            
>  
> a local.cfg file on your hard drive and DHCP.                                 
>  
> Reading configuration from /tmp/local.cfg                                     
>  
>                                                                               
>  
> read_kernel_append_parameters                                                 
>  
>                                                                               
>  
> start_network                                                                 
>  
> SIOCSIFADDR: No such device                                                   
>  
> SIOCSIFNETMASK: No such device                                                
>  
> SIOCSIFBRDADDR: No such device                                                
>  
>                                                                               
>  
> I couldn't configure the network interface using your pre-boot settings:      
>  
> DEVICE: eth0                                                                  
>  
> IPADDR: 192.168.1.245                                                         
>  
> NETMASK: 255.255.255.0                                                        
>  
> BROADCAST: 192.168.1.255                                                      
>  
>                                                                               
>  
> Killing off running processes.                                                
>  
> read_local_cfg                                                                
>  
> Checking for floppy diskette.                                                 
>  
> YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL.               
>  
> Found floppy diskette.                                                        
>  
> Found /local.cfg on floppy.                                                   
>  
> Copying /local.cfg settings to /tmp/local.cfg.                                
>  
> NOTE: local.cfg settings from a floppy will override settings from            
>  
> a local.cfg file on your hard drive and DHCP.                                 
>  
> Reading configuration from /tmp/local.cfg                                     
>  
>                                                                               
>  
> read_kernel_append_parameters                                                 
>  
>                                                                               
>  
> start_network                                                                 
>  
> SIOCSIFADDR: No such device                                                   
>  
> SIOCSIFNETMASK: No such device                                                
>  
> SIOCSIFBRDADDR: No such device                                                
>  
>                                                                               
>  
> I couldn't configure the network interface using your pre-boot settings:      
>  
> DEVICE: eth0                                                                  
>  
> IPADDR: 192.168.1.245                                                         
>  
> NETMASK: 255.255.255.0                                                        
>  
> BROADCAST: 192.168.1.255                                                      
>  
>                                                                               
>  
> Killing off running processes.                                                
>  
>                                                                               
>  
> write_variables                                                               
>  
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> This is the SystemImager autoinstall system                                   
>  
>                                                                               
>  
> Your autoinstall has failed. You can use the shell prompt to try and see      
>  
> what happened. You may be able to use the <Shift>+<Page Up> keys to scroll    
>  
>                                                                               
>  
>                                                                               
>  
> BusyBox v1.1.1 (2006.10.24-09:14+0000) Built-in shell (ash)                   
>  
> Enter 'help' for a list of built-in commands.                                 
>  
>                                                                               
>  
> / # back and see the text that has passed off the top of the screen. You can 
> us
> <alt>+<f2>, <f3>, or <f4> to work at an alternate shell prompt and preserve   
>  
> your messages on the main screen, which is on <alt>+<f1>. Then go back and    
>  
> re-read the documentation to see if your problem is described there.          
>  
> You have read the documentation, right? :-)                                   
>  
>                                                                               
>  
> If you absolutely cannot figure it out, visit the SystemImager support page   
>  
> at http://systemimager.org/support/. There you can search the email list      
>  
> archives, ask your question on IRC, or even join a mailing list to ask your   
>  
> question. There's a good chance someone else has experienced this very same   
>  
> issue and can help answer your question. If you find the answer and it's not  
>  
> in the documentation, or if you identify a bug, please submit a bug report at 
>  
> the SystemImager support page.                                                
>  
>                                                                               
>  
> Have fun! http://systemimager.org/team/                                       
>  
>                                                                               
>  
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>                                                                               
>  
> / # echo $?                                                                   
>  
> 0                                                                             
>  
> / # ifconfig eth0 192.168.1.245 netmask 255.255.255.0 up                      
>  
> / # echo $?                                                                   
>  
> 0                                                                             
>  
> / # ifconfig                                                                  
>  
> eth0      Link encap:Ethernet  HWaddr 00:03:FF:00:51:A2                       
>  
>           inet addr:192.168.1.245  Bcast:192.168.1.255  Mask:255.255.255.0    
>  
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1                  
>  
>           RX packets:6 errors:0 dropped:0 overruns:0 frame:0                  
>  
>           TX packets:4 errors:0 dropped:0 overruns:0 carrier:0                
>  
>           collisions:0 txqueuelen:1000                                        
>  
>           RX bytes:360 (360.0 B)  TX bytes:308 (308.0 B)                      
>  
>           Interrupt:11 Base address:0x6000                                    
>  
>                                                                               
>  
> lo        Link encap:Local Loopback                                           
>  
>           inet addr:127.0.0.1  Mask:255.0.0.0                                 
>  
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1                            
>  
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0                  
>  
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0                
>  
>           collisions:0 txqueuelen:0                                           
>  
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)                              
>  
>                                                                               
>  
> / # echo $?                                                                   
>  
> 0                                                                             
>  
> 
> 

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Sisuite-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sisuite-users

Reply via email to