Yes, It don't work!!! I have tried it on 3 of the last "Indoor" airbridges we bought, after many problems with the newer firmware, and it just don't work!!!
Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge Sent: Tuesday, June 03, 2003 11:57 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Firmware Downgrade Because of the lack of stability with current Smartbridges AirBridge Outdoor Firmware, we are going to begin downgrading our firmware to the last stable release. Others have already done this. I'm curious if there are any quirks discovered while downgrading your firmware from the current rev to the last stable rev? Where you able to successfully do this "remotely" (although remote, we will still be on the same LAN broadcast domain segment --- just not at each customers site)? Also, did you downgrade the APPO units as well or just the ABO units? We are thinking we only need to downgrade the ABO units but we may be incorrect with this assumption. Any insight on the process(es) used by others to allow you to successfully downgrade your firmware would be greatly appreciated. Thanks much. Jack The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
