RE: [smartBridges] Firmware Downgrade

[phantam]

Title: Message

Scott as I said I have bought 120 no 130 I haven't installed 10 of them I have returned 1 because a power surge killed it and now 2 others that I believe one is corrosion and 1 that I don't know about. I'm not a troll but I don't jump to conclusions off of others problems either.   Chris   From: Scott Damron [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 03, 2003 8:50 PM To: [EMAIL PROTECTED]   Are you some kind of Troll?!?!  I have ordered 6 airbridges, and two have had to be returned.  Not due to a problem on our end, it was bad hardware.  Maybe they need to pay attention to quality control.   Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phantam Sent: Tuesday, June 03, 2003 5:36 PM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] Firmware Downgrade What problems for gods sake I have 120 airBridges deployed and guess what? All with 1.5 firmware and it's working great , I can monitor have no problems except occasional freezing? Maybe this will be fixed better in next version. Even the power issue that everyone has been having problems with seems to be very seldomely apparent in my installs. Perhaps the problem isn't entirely Smartbridges fault. Chris -----Original Message----- From: Scott Damron [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 03, 2003 7:53 PM To: [EMAIL PROTECTED] Yes, It don't work!!!  I have tried it on 3 of the last "Indoor" airbridges we bought, after many problems with the newer firmware, and it just don't work!!! Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Jack Berridge Sent: Tuesday, June 03, 2003 11:57 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Firmware Downgrade   Because of the lack of stability with current Smartbridges AirBridge Outdoor Firmware, we are going to begin downgrading our firmware to the last stable release.  Others have already done this.  I'm curious if there are any quirks discovered while downgrading your firmware from the current rev to the last stable rev?  Where you able to successfully do this "remotely" (although remote, we will still be on the same LAN broadcast domain segment --- just not at each customers site)? Also, did you downgrade the APPO units as well or just the ABO units? We are thinking we only need to downgrade the ABO units but we may be incorrect with this assumption. Any insight on the process(es) used by others to allow you to successfully downgrade your firmware would be greatly appreciated. Thanks much.   Jack The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6    The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6