Chris, what is freezing ?
We've had about the same luck here with V:0.01.04.. I think the
reason people are having problems with 0.01.04 is primarily due to the
fact they are setup and used to using a transparent bridge. I actually
LIKE the changes in 0.01.04.. Less work when a customer decides to swap a
NIC/WiFi card.
Scott
On Tue, 3 Jun 2003, phantam wrote:
> What problems for gods sake I have 120 airBridges deployed and guess what?
> All with 1.5 firmware and it's working great , I can monitor have no
> problems except occasional freezing? Maybe this will be fixed better in next
> version. Even the power issue that everyone has been having problems with
> seems to be very seldomely apparent in my installs. Perhaps the problem
> isn't entirely Smartbridges fault.
>
> Chris
>
> -----Original Message-----
> From: Scott Damron [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 03, 2003 7:53 PM
> To: [EMAIL PROTECTED]
>
> Yes,
>
> It don't work!!! I have tried it on 3 of the last "Indoor" airbridges
> we bought, after many problems with the newer firmware, and it just
> don't work!!!
>
> Scott
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jack Berridge
> Sent: Tuesday, June 03, 2003 11:57 AM
> To: [EMAIL PROTECTED]
> Subject: [smartBridges] Firmware Downgrade
>
>
> Because of the lack of stability with current Smartbridges AirBridge
> Outdoor Firmware, we are going to begin downgrading our firmware to the
> last stable release. Others have already done this. I'm curious if
> there
> are any quirks discovered while downgrading your firmware from the
> current
> rev to the last stable rev? Where you able to successfully do this
> "remotely" (although remote, we will still be on the same LAN broadcast
> domain segment --- just not at each customers site)?
>
> Also, did you downgrade the APPO units as well or just the ABO units?
> We
> are thinking we only need to downgrade the ABO units but we may be
> incorrect with this assumption.
>
> Any insight on the process(es) used by others to allow you to
> successfully
> downgrade your firmware would be greatly appreciated.
>
> Thanks much.
>
>
>
> Jack
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
> the body type unsubscribe smartBridges)
> Archives: http://198.63.203.6
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://198.63.203.6
>
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
