Ditto here...two units out of ten shipped from EC. Exactly the same behavior described below. No problems found with twenty units shipped from F/A.
Jeremy Oswalt wrote: > > That's EXACTLY what's happening with the last Outdoor I installed. I > think they, SB, asked me to get them the Ethernet injector. > > -- > Jeremy > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of George M. Walden > Sent: Tuesday, June 10, 2003 4:15 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] trouble with units. > > Ditto, on the Ethernet issue w/ sB2100. We have had 3 customers that > needed > replaced (as of now) 3 times each (total of 9 units).....all flaky units > were from the last shipment. Or, should I say, from the first batch of > units that made it to the USA from sB's new contract OEM. > > -George M. Walden > > on 6/10/03 1:19 PM, Scott Damron at [EMAIL PROTECTED] wrote: > > > Yes, > > My last one would not see the AP and the ethernet and wireless lights > > would go out when you did a search for wireless networks. It would > see > > the network when you rebooted, but when you tried to assoc. it, it > would > > again loose both lights and freeze. Luckily, we purchased them from > > electro comm and they RMA'd them without trouble. > > > > Scott > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of David Blood > > Sent: Tuesday, June 10, 2003 10:52 AM > > To: [EMAIL PROTECTED] org > > Subject: RE: [smartBridges] trouble with units. > > > > > > With my last shipment of sb2100 I am having terrible issues. I don't > > believe that it is the configuration as I have set up many of these > and > > have not had these problems in the past. > > > > Issues. > > > > Ethernet port is flaky. Sometimes it works and sometime it doesn't. > No > > distance is not an issue on the ethernet cable. All case less than 50 > > ft and in one case less than 5 ft. It seems to happen when I make any > > configuration change. I can power cycle the unit to get it to come > > back. > > > > When I try to use site survey to list availabe APs I get nothing. > When > > it does work then several aps show up. > > > > The air bridges lose associations and then wil not reassociate with > out > > a reboot. > > > > > > Anyone else having these issues with the latest shipments? > > > > Kind Regards, > > > > David > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > > the body type unsubscribe smartBridges) > > Archives: http://198.63.203.6 > > > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges > > <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://198.63.203.6 > > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
