|
The specs I found a while back on the SP150 said they were 34V. I
thought that was strange, but I initially wanted a bunch of 150W panels. I went
with Kyocera 120’s, and forgot about it until now. I just checked the specs
again, and sure enough: 34V. Have you measured the output of your panels? http://www.shell.com/static/shellsolar/downloads/products/uk/ShellSP150_UKv3.pdf Jason Szumlanski -----Original
Message----- Hmm, I purchased 24V
panels, but so far so good! -----Original
Message----- You’ve got
34V panels and a charge controller made for 12V, 24V, or 48V… How is
that working? Jason -----Original Message----- I have (2) Shell SP150 panels, (1) Trace C40 with DVM, (8) 6-volt,
(1) 24v to 12V convertor. (2) APPO's, (1) Trango, (1) Switch. -----Original
Message----- I just tested a couple of
AP Totals and they were drawing .37 Amps at 14.1 Volts. I found them more power
efficient than expected, and calculated that a single 12V, 80aH battery would
be more than enough to handle a few days of cloudiness and keep the
depth-of-discharge to under 50%. You can look at the Concord PVX-690T AGM for
about $120 or you can get a 12V lead-acid for under $70. Jason Szumlanski -----Original Message----- For those of us who're going to be using these on battery power
(solar charged), actual current figures would be REALLY helpful. Thanks NEOFAST.NET
|
Title: Message
- RE: [smartBridges] POE, voltage range Alex Wong
- [smartBridges] ABO, APPO power consumption Mark Koskenmaki
- RE: [smartBridges] ABO, APPO power consumption Jason
- RE: [smartBridges] ABO, APPO power consumptio... Jason
- RE: [smartBridges] ABO, APPO power consumptio... Lanham Rattan
- RE: [smartBridges] ABO, APPO power consum... Jason
- RE: [smartBridges] ABO, APPO power c... Lanham Rattan
- RE: [smartBridges] ABO, APPO power c... Jason
- RE: [smartBridges] ABO, APPO power c... Lanham Rattan
- RE: [smartBridges] ABO, APPO power consumption paul
