RE: [smartBridges] remote management using simpleMonitor

[Hunter, Newall (Chipping Sodbury)]

Seeni   I was given the wrong info on the type of units we are using, they are airPoint Pro outdoor units rather than airBridges.       The set up I have is:-                                                                              Omni PC1 ----------LAN--------AirPoint PRO <--------------->AirPoint PRO <--------------->AirPoint PRO ----LAN----PC2 10.17.0.10                  10.17.0.31                          10.17.0.30                      10.17.0.32                  10.17.0.20     with simpleMonitor is running on PC1.  From PC1 I can ping and manage the AirPoint PRO 10.17.0.31 From PC1 I cannot ping or manage the AirPoint PRO 10.17.0.30 From PC1 I cannot ping or manage the AirPoint PRO 10.17.0.32 From PC 1 I can ping PC2   with simpleMonitor is running on PC2 From PC2 I can ping and manage the AirPoint PRO 10.17.0.32 From PC2 I cannot ping or manage the AirPoint PRO 10.17.0.30 From PC2 I cannot ping or manage the AirPoint PRO 10.17.0.31 From PC2 I can ping PC1   The IP addresses on the AirPoints are fixed (no DHCP)   Should I be able to manage all three airPoints using simpleMonitor on one of the PCs?   Thanks Newall    -----Original Message----- From: Seeni [mailto:[EMAIL PROTECTED] Sent: 26 June 2003 19:26 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] remote management using simpleMonitor Yes, you can use the simplemonitor to manage our units from the different subnet with proper routing (through router) and it should able to reach the different subnet. If you are in the different subnet range, you need to enter the IP address by manually. Before doing that, please make sure that to PING that subnet IP address. If you are in the public internet network, you can configure with Public IP address or through VPN to reach the network.  Also you can use our SimpleNMS to manage the sb devices remotely. For more details, please go thru the following link. http://www.smartbridges.com/new/products/simpleNMS.php Thanks Seeni, SB support     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hunter, Newall (Chipping Sodbury) Sent: Thursday, June 26, 2003 10:35 PM To: '[EMAIL PROTECTED]' Subject: [smartBridges] remote management using simpleMonitor   Can I use simpleMonitor to manage airPoint Pro smartBridges across the radio link?   I can get it to work with the smartBridge that is connected to the same physical LAN as the PC running simpleMonitor but appear unable to access the smartBridge at the remote end of the radio link.       TA Newall Hunter, This e-mail and any attachment transmitted with it are confidential and are intended for the named person's use only. The contents of the e-mail may contain sensitive and private or legally privileged information. If you have received this e-mail in error, please delete it (and any attachment) from your system and notify the sender immediately. You should not retain, copy or print the contents of this e-mail (or any attachment) nor should you, directly or indirectly, disclose or distribute the contents to anyone. Este correo electr�nico y cualquier fichero anexo al mismo es confidencial y esta exclusivamente dirigido a la persona indicada. Los contenidos del correo electr�nico pueden contener informaci�n privada, delicada o legalmente protegida. Si ha recibido este correo electr�nico por error, por favor b�rrelo (junto con los anexos) de su sistema y notifique al remitente inmediatamente. No debe retener, copiar o imprimir los contenidos de este correo electr�nico (o cualquier fichero anexo) ni debe, directa o indirectamente, revelar o distribuir los contenidos del mismo. This e-mail and any attachment transmitted with it are confidential and are intended for the named person's use only. The contents of the e-mail may contain sensitive and private or legally privileged information. If you have received this e-mail in error, please delete it (and any attachment) from your system and notify the sender immediately. You should not retain, copy or print the contents of this e-mail (or any attachment) nor should you, directly or indirectly, disclose or distribute the contents to anyone. Este correo electr�nico y cualquier fichero anexo al mismo es confidencial y esta exclusivamente dirigido a la persona indicada. Los contenidos del correo electr�nico pueden contener informaci�n privada, delicada o legalmente protegida. Si ha recibido este correo electr�nico por error, por favor b�rrelo (junto con los anexos) de su sistema y notifique al remitente inmediatamente. No debe retener, copiar o imprimir los contenidos de este correo electr�nico (o cualquier fichero anexo) ni debe, directa o indirectamente, revelar o distribuir los contenidos del mismo.

image001.gif
Description: Binary data