Hello Lars, I am downloading the newest simpleNMS right now, I will try your suggestion after I try the new software. I may need to contact you for more info.
Thanks, Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: Friday, June 27, 2003 8:18 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] remote management using simpleMonitor Scott Damron wrote: > No packet filter, Yes, I can ping the Ab from VPN connection, my > connection is via ethernet on my network, across the Internet to a VPN > server, to my wired network on that side, then out to the wireless > network at the end. The radios are all on the same subnet. All radios > are managed via SNMP. If you can ping the aB through the VPN then all routing should be set up correctly. If you can manage the COR/RORs with SNMP, then no filter is in place. Weird, it should work. Do you have Ethereal or a similar packet sniffer available? Run a packet dump on the VPN interface on your computer and on a computer connected via a hub to the eth interface of the COR while trying to connect to the aB with simpleMonitor. If you need help, contact me off list. -- LarsG The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
