Good work. Thanks for the help. LML -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Vasu (sB Tech Team) Sent: Sunday, July 06, 2003 10:29 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Backhaul over airBridge
The setup you have mentioned works fine when the airBridge uses the old firmware 0.09.10 which is a transparent bridge, when you use the airBridge with the latest firmware the given scenario does not work and we are trying to resolve this issue, in the meanwhile we recommend as suggested before Wireless PC----aB ---- APPO Total (AP)--- wired--Microtik---wired--Gateway(RG-1000)---Internet. With Best Regards, Vasu -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lon Lease Sent: Monday, July 07, 2003 11:58 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] Backhaul over airBridge Nice catch. I believe that is the situation. I have a aB connected to the internet service and its wireless link to the APPO Total configured as an AP. From another wireless client through the APPO back to the aB, I can't see the gateway just to the public side of the router. The configuration looks like this: Wireless PC----APPO Total (AP)----aB--- wired--Microtik---wired--Gateway(RG-1000)---Internet. Any of the wired segments work fine and the Router is fine as well. The pc can reach to both wired sides of the Mt but not the gateway. I believe at this time that this is not an approved application. LML -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Roger Hartley Sent: Sunday, July 06, 2003 7:05 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Backhaul over airBridge How do you mean a "Total configured as an AP"? Is it a Total access point or bridge? I have an aPPO on each end of my backhaul feeding another aPPO serving as the AP. I was advised that aBs won't pass the traffic to serve as a backhaul and found that to be the case. aPPOs work just fine. Lon Lease wrote: > Is any one feeding their internet connection from an airBridge wireless > link to an Total configured as an AP? I don't seem to be able to reach > a far gateway through a router. As wired client from the airbridge all > is well. As a wireless client from the AP I can I can ping to the > public side of the router but not reach the gateway beyond. Is the SB > equipment not allowing the connection? I do not have the the > interclient communications selected. Thanks. LML The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
