Re: [smartBridges] Topo Maps and coverage areas

[Ray]

Use radio coverage (single) and adjust the azimuth range to get the coverage you need.  Also, make sure you check out Edit -->Merge from Mapblast --> Add   Ray         ----- Original Message ----- From: Dennis Burgess To: [EMAIL PROTECTED] Sent: Monday, July 14, 2003 10:24 PM Subject: Re: [smartBridges] Topo Maps and coverage areas Ray, THANK YOU SOOO MUCH.   This proggy is too kewl once I figured it out! Very nice.   Now, the question is.  Should I be looking at a RF coverage or Visual coverage?  Also, it always assums a Omni ...I was planning on using APPOs with 90 degree sectors.  What is the info that I should be putting in for these.  Or is the omni a good direction assuming that I have 360 coverage with sectors ?   Dennis   ----- Original Message ----- From: Ray To: [EMAIL PROTECTED] Sent: Monday, July 14, 2003 10:21 PM Subject: Re: [smartBridges] Topo Maps and coverage areas The nice WISP folks around the lists helped me learn Radio Mobile http://www.cplus.org/rmw/english1.html so I would like to pass it on.   I would be happy to help you if you send me some information on your location and network.   Ray ----- Original Message ----- From: Dennis Burgess To: [EMAIL PROTECTED] Sent: Monday, July 14, 2003 6:50 PM Subject: [smartBridges] Topo Maps and coverage areas I am looking for some way to find out my expected coverage range from my tower. I have found several programs that do niffy things with topo maps.  I have topo maps, but I am looking for something that can take the lines in my map and display it in 3D?  OR, what about taking it and showing what is lower/higher than where I am at?   Dennis