DHCP Pool method will not work with airBridge in firmware 0.01.07 due to Mac translation. Enabled Address method is working fine. Has anyone tested DHCP pool method on the same with WET11?
sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Banes Sent: Thursday, July 31, 2003 8:11 PM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] PPPoE on Firmware version 0.01.07 Did you indicate a while back that you were using Mikrotik hotspots? If so does the new 0.01.07 firmware work with the dhcp-pool login method? John ----- Original Message ----- From: "Kevin Summers" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 30, 2003 10:31 PM Subject: RE: [smartBridges] PPPoE on Firmware version 0.01.07 > > ..or at least one more step to being able to make a change > now to all (or some) of my client's radios without having > to roll the truck to each and every one of them. Which is > of course what I get to do now since they are still all > running the 0.09.10 firmware. :-) Oh well, one more time > around to visit them, and then it can all be run from the > office. That's going to save me a HUGE amount of time. > > SB Team! Thanks for the hard work, and excellent effort. > It seems to have paid off. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Ray > > Sent: Wednesday, July 30, 2003 9:52 PM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > Sweet! One more step to better security! > > > > Ray > > > > > > ----- Original Message ----- > > From: "Kevin Summers" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, July 30, 2003 5:44 PM > > Subject: RE: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > > > > > Tested PPPoE with MikroTik RouterOS version 2.7.0 > > > > > > Test # 1 - Linksys Cable/DSL Router > > > > > > - unsuccessful. I plugged the wrong wall wart into it > > > and I think I fried it. > > > > > > Test # 2 - Efficient Networks Speedstream Cable/DSL Router > > > > > > - PPPoE Login worked fine > > > - Internet access didn't work that great because the router > > > wouldn't accept the subnet mask I gave it for it's WAN > > > interface of 255.255.255.255. It automatically assumed > > > 255.0.0.0 because it was a 65.x.x.x address. > > > (now I know why these were only $12 at Fry's...) > > > > > > Test # 3 - SMC Barricade Cable/DSL Router > > > > > > - unsuccessful. This unit I think is also fried, but when > > > a manufacturer wants you to use a paperclip and hold it > > > on pins 4 and 9 for up to 30 seconds to reset the device, > > > you are probably better off without it. > > > > > > Test # 4 - NEW Linksys Cable/DSL Router > > > > > > - PPPoE login was successful and I was able to get about 768K > > > throughput on it. I'm checking into why it's so slow. > > > > > > Looks like the problem has been fixed, and PPPoE does indeed > > > work fine on the new firmware with MikroTik... > > > > > > Kevin Summers > > > KISTech Internet Services Inc. > > > www.kistech.com > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] Behalf Of Ray > > > > Sent: Wednesday, July 30, 2003 4:02 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > > > > > > > I'm sitting at my computer repeatedly hitting "Send/Receive"... > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Kevin Summers" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, July 30, 2003 3:47 PM > > > > Subject: RE: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > > > > > > > > > > > > > I'm just about to test it with MikroTik. > > > > > > > > > > Kevin Summers > > > > > KISTech Internet Services Inc. > > > > > www.kistech.com > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > > > > > > [mailto:[EMAIL PROTECTED] Behalf Of Ray > > > > > > Sent: Wednesday, July 30, 2003 3:31 PM > > > > > > To: [EMAIL PROTECTED] > > > > > > Subject: Re: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > > > > > > > > > > > > > Has anyone tested this with Mikrotik? > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Lars Gaarden" <[EMAIL PROTECTED]> > > > > > > To: <[EMAIL PROTECTED]> > > > > > > Sent: Wednesday, July 30, 2003 3:18 PM > > > > > > Subject: Re: [smartBridges] PPPoE on Firmware version 0.01.07 > > > > > > > > > > > > > > > > > > > Eric Helm wrote: > > > > > > > > > > > > > > > We unsuccessfully tested a NetScreen firewall PPPoE > > client. This > > > > > > particular > > > > > > > > client has the same problem most other PPPoE clients had with > > the > > > > old > > > > > > > > firmware. > > > > > > > > > > > > > > Odd. I tested 0.01.07 today, and from what I can tell from > > > > the packet > > > > > > > dumps it should work perfectly for any RFC compliant PPPoE > > > > client and > > > > > > > server. (good work, sB!) > > > > > > > > > > > > > > Any chance you could provide a packet dump of the > > > > connection attempt? > > > > > > > > > > > > > > Are you by any chance using PPPoE relay? Some clients - > > especially > > > > > > > el-cheapo broadband routers - won't work correctly with PPPoE > > relay. > > > > > > > > > > > > > > I don't work for sB but I have a vested interest in making sure > > that > > > > > > > the PPPoE pass-through on the airBridge works perfectly. > > > > We're running > > > > > > > a pure PPPoE network too, and are planning to switch > > from airPoint > > > > > > > indoors in clientbirdge mode to airBridge Outdoor for the CPEs. > > > > > > > > > > > > > > -- > > > > > > > LarsG > > > > > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > > > smartBridges <yournickname> > > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe > > > > > > smartBridges) > > > > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > > > smartBridges <yournickname> > > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > > > > unsubscribe smartBridges) > > > > > > Archives: http://archives.part-15.org > > > > > The PART-15.ORG smartBridges Discussion List > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > > smartBridges) > > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > > unsubscribe smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system (http://www.grisoft.com). > > Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003 > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
