Nish, Maybe you did not understand homes in the United States don�t have an electrical outlet on the roof or anywhere NEAR the radio? if you are to mount this thing near any outlet, most houses have then at the front door or back door of the house?? Is this unit designed to plug into an electrical outlet itself or does this just sit inline with the cat 5 with NO electrical connection to the outlet??
>From what the PDF describes I envision this unit to plug into a wall outlet and feed power to the cat 5 to the radio and cat 5 to the client router / PC? Similiar to how the POE works now then you have 2 ground lugs that go to earth ground?? Once again maybe if I have a picture to see I would understand but from what you are describing it will not work for us? Quoting Nish Park <[EMAIL PROTECTED]>: > That is precisely what it is designed for. It should be mounted outside > the building, at the point of entry. As it is required by the NEC - 801 > and NEC - 802 It has large grounding lugs to divert the lightning > discharge. You will take 2 wires through the hole in the wall - RJ45 for > data and RJ11 for power. > > Even though the name is PoE Outdoor, it has the additional functionality > of Lightning protection to meet the building code. > > Nish > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno > Sent: Tuesday, August 19, 2003 12:01 PM > To: '[EMAIL PROTECTED]' > Subject: RE: [smartBridges] PoE Outdoor > > Looks good but how will you make this work for lightening protection?? > The > lightening protector has to be outside at the point of entry?? > Am I missing something here? when was the last time you saw a power plug > next > to where you mount your radio? I am sure the customer will not go for an > > electrical extension cord going up to the roof? nor will I be running a > whole > electrical conduit run with J box for an outlet that would not be > feasible > monetarily nor time wise?? > There for it is going to be INEFECTIVE I sure as heck don't want > lightening > should it strike to run down the line in the house burning everything on > its > way BUT HEY the POE stopped if from going into the rest of the house > should it > happen to have survived the ensuing fire that started from the > insulation, > drywall and wood burning where the cable ran through the wall. > > Once again maybe I am just not seeing how this thing works? is there a > diagram > or something other then the PDF doc that just tells about it? > > > > > > > Quoting The Wirefree Network <[EMAIL PROTECTED]>: > > > Very Sweet!! > > > > Thanks sB for continuing to improve upon your product line! > > > > I for one do like the idea of a ONE-STOP-SHOP for all my WISP needs! > > > > Sully > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of sB Tech Support > > Sent: Monday, August 18, 2003 7:03 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] PoE Outdoor > > Importance: High > > > > smartBridges is set to launch the PoE Outdoor in the coming days . The > > PoE Outdoor is a IEEE 802.3af compliant Power over Ethernet solution, > > with advanced protection and diagnostic features. > > > > For a brief review of the features brought to you by the PoE Outdoor, > > please refer the attached document. > > > > Alex > > sB Tech Support > > > > > > > Martin Moreno > Blazen Wireless > 909-907-4106 > www.blazenwireless.com > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
