I would do it differently main ap -> with a sector on a aPP to get you good coverage, then a aBT from each subscriber going back and at each subscriber a aPP with a 7.5db omni there nice and small and just powerful enough that way you can expand off of one customer using different channels of course for each link alternating just draw it on a map keep the signals spread out.
Chris
-----Original Message-----
From: sB Tech Support [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 20, 2003 6:45 AM
To: [EMAIL PROTECTED]
If subscriber#2 can get the signal from subscriber #1, then you can put
another access point at subscriber #1 for subscriber#2 using client
device to associate with.
Main AP-----Subscriber#1----------Subscriber#2
(aPPT) (aBT & aPPT) (aBT)
The channel & ESSID will be configured differently for main AP to
subscriber#1 and Subscriber#1 to subscriber#2.
Hope this help.
Alex
sB Tech Support
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of NightOwl-Wireless
Sent: Wednesday, August 20, 2003 5:16 PM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] smartBridges as a mesh network?
Opinions wanted, What would be the best way to use the smartBridges
products as a mesh network environment?
Per instance say the main AP is the airPoint Pro Total and subscriber
#1
is 1/2 mile away and can associate with the AP no problem.. but
subscriber
#2 is 1 mile away and can't get signal from the main AP. What would be
the suggested smartBrudges unit to use at subscriber #1 location to
repeat
to subscriber #2..? and so on..?
Is it possible to do this and not use a obtrusive antenna on subscriber
#1's house?
This is all pretty new to me but I'm ready to play!
Thanks in advance!
Gary Johnson
NightOwl Networks
www.nightowl.net
---
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
