RE: [smartBridges] Remote Power Rebooters

[Chris Chance]

Title: Message

Tom hes asking as I did before that SB would implement in FIRMWARE on the AB's and AP's that if there were either no association or no route to gateway then it would reboot after a set time interval no hardware needed the snmp reset subroutines are there just reuse them.   From: Blazen Wireless [mailto:[EMAIL PROTECTED] Sent: Monday, August 25, 2003 2:57 PM To: [EMAIL PROTECTED]   If thats the cause why is it not working? maybe we need to focus on that if in fact they do have a watchdog timer in the units already? but from my past conversations about the effectiveness of the simple status and explaining this type of feature "watchdog timer" should be in the firmware I got an answer of hmmm we will look into it.. So to me that would indicate it is not in there already?   Sb can you confirm??   Thanks     ----- Original Message ----- From: Tom Haynes To: [EMAIL PROTECTED] Sent: Monday, August 25, 2003 11:30 AM Subject: RE: [smartBridges] Remote Power Rebooters   It has been in there since the product was released. The watchdog timer is a hardware implimentation that preforms a hard reset when the firmware quits responding. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Earl Campbell Sent: Monday, July 14, 2003 8:24 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Remote Power Rebooters Why doesn't SB software people consider a watchdog timer in the firmware we could set on/off and time between boots ? It would reboot the SB device if it were not associated for xx mins. We could set this feature on or off and set the xx mins time. Not hard to implement, and it might help with the rebooting need. Earl - UpHi.net   ____________________________________________________   IncrediMail - Email has finally evolved - Click Here

<<attachment: image001.gif>>