|
Agreed! -----Original
Message----- Why can't this be firmware based instead of client pc based seeni,
sorry to say but Ethernet clients and software don't mix very well having
clients install it is not a possibility for me it just isn't most of the people
here wish they had 0 running in the background is there any plan to upgrade
simplestatus from client pc to firmware hardcode? From: Seeni Mohamed
[mailto:[EMAIL PROTECTED] Yes.
this software should be installed at the (client side) customer PC which is
connected behind one airBridge unit. This software should be running always at
the back round of the PC. Seeni,
SB support -----Original
Message----- PLEASE
keep in mind this simple status will not work for you unless the radio is
connected DIRECT to the customer PC... So far
I have had it loaded on one customers PC who does not have a router yet and it
seems to work I will call him this evening to get more feedback.. ----- Original Message -----
Sent: Subject: RE: [smartBridges] Remote Power Rebooters We did not implement watchdog timer feature in the
hardware, however we have included this feature in our new firmware 1.4j.8 and
0.01.07. We also have a (simple reset) smartbridges utiltiy called
simplestatus and this utility for the airBridge, to be installed on the client
end. You can set the time interval to check the association. On wireless link and if it
is not associated to the AP, it will automatically reset the aB. The client PC should be running this software at back round
screen. You can download the simpleStatus 090 at http://www.smartbridges.com/beta/utility/simpleStatus090.exe If any one interested, please try this software and give us
your feedback. Thank you Seeni, SB support -----Original Message----- If thats the cause why is it not working? maybe we need to focus
on that if in fact they do have a watchdog timer in the units already? but from
my past conversations about the effectiveness of the simple status and
explaining this type of feature "watchdog timer" should be in the
firmware I got an answer of hmmm we will look into it.. So to me that would
indicate it is not in there already? Sb can you confirm?? Thanks ----- Original Message -----
Sent: Subject: RE: [smartBridges] Remote Power Rebooters It has been in there since the product was released. The watchdog
timer is a hardware implimentation that preforms a hard reset when the firmware
quits responding. -----Original
Message-----
____________________________________________________ |
<<image001.gif>>
