With the newer airbridges, etc. the unit is not a transparent bridge. Scott
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayland Sent: Wednesday, September 10, 2003 8:03 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Who's Responsible? ----- Original Message ----- From: "Jeremy Oswalt" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 3:06 PM Subject: RE: [smartBridges] Who's Responsible? > Just remember that he "could" request 2 leases depending on your > setup; one > for the Airbridge and one from his computer. Both would show the same > MAC (the Airbridge MAC) if using new firmware. > > By the way, don't use his PC's MAC as suggested below. You won't see > it on > your end. > > But this all depends on how you have your Airbridge configured. You > could test and give the Airbridge a static IP, then see how many > requests his computer makes. > > _____ > Jeremy I am not sure why you say that we can't see the actual PC MAC. On my set up we are seeing the PC MAC and successfully assign IP addresses to them using DHCP. The firmware in the AP is 1.4j.6 Can you explain further? Regards, Wayland. ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
