Hmmm...must be a packet inspecting DHCP server. Didn't know they existed. Cool.
Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayland Sent: Wednesday, September 10, 2003 9:08 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Who's Responsible? ----- Original Message ----- From: "The Wirefree Network" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 4:13 PM Subject: RE: [smartBridges] Who's Responsible? > Wayland, > You must be using airPoints (cb mode) on the client or the very old > airBridge firmware. Because the most recent airBridge firmware appends > the airBridge MAC address to the client's IP address. Therefore, only > the MAC of the airBridge shows up at both the aPPo and the arp table > within your gateway. > > Sully > Sully, Latest airBridge firmware and IP-Cop linux firewall as DHCP. It happly assigns the IP addresses to the MAC addresses of the PCs. Wayland. ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
