The senders MAC is replaced with the bridges MAC but the DHCP requesting MAC
in the Packet is the PCs. Some DHCP servers look at the wrong address.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, September 10, 2003 2:50 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Who's Responsible?


If by "packet inspecting", you mean that the DHCP server is looking inside
the 
packets, I don't think that's what is happening.  We're doing this same
thing 
(leasing IPs based on the customer PC's MAC address) using the standard ISC 
dhcpd.  I think the Airbridges forward DHCP requests with the PC's MAC 
address, rather than their own.  Not that it matters, but WET11s do this as 
well.

Craig


Quoting The Wirefree Network <[EMAIL PROTECTED]>:

> Hmmm...must be a packet inspecting DHCP server.  Didn't know they
> existed.  Cool.
> 
> Sully
> 
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Wayland
> Sent: Wednesday, September 10, 2003 9:08 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] Who's Responsible?
> 
> 
> ----- Original Message -----
> From: "The Wirefree Network" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, September 10, 2003 4:13 PM
> Subject: RE: [smartBridges] Who's Responsible?
> 
> 
> > Wayland,
> > You must be using airPoints (cb mode) on the client or the very old
> > airBridge firmware.  Because the most recent airBridge firmware
> appends
> > the airBridge MAC address to the client's IP address.  Therefore, only
> > the MAC of the airBridge shows up at both the aPPo and the arp table
> > within your gateway.
> >
> > Sully
> >
> 
> 
> Sully,
> 
> Latest airBridge firmware and IP-Cop linux firewall as DHCP. It happly
> assigns the IP addresses to the MAC addresses of the PCs.
> 
> Wayland.
> 
> 
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org  
> 
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
> 
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org  
> 
> 


----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to