I would love to see speeds like that I have customers less then 3 miles and can only pull abotu 1.5 megs tops to the noc I cant wait for my cisco switch so I can swap that one up at th etower and see if that is the roto of all my problems..
Quoting Pascal Losier <[EMAIL PROTECTED]>: > Just for your info, I got a custumer going beetween 22% & 27%. > Quality beetween 50% & 75%. > Its a 8 miles link with a 19db panel. > He is always getting 1200k to 1600k transfer. > But he paid for the 512k package & he is really happy. > > Link has been stable for last 3 month. > > I'm will installed an AGC amp on the APP with the 12db omni soon. > I hope it will bring him above 40 %. > > Others CPE rang beetween 37% & 80%. > > Above 40% seems to get 2.4Mb transfer same with 80%. > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless > Sent: Monday, September 29, 2003 11:04 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Speed problem > > > I doubt it. > ----- Original Message ----- > From: "Tegan Snyder" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, September 29, 2003 6:56 PM > Subject: RE: [smartBridges] Speed problem > > > Do you think a RTS/CTS Frag setting change would help? > > Tegan Snyder > RCOM, L.L.C. - Your Rural Communications Leader > Office: 308-237-7266 > Fax: 308-237-5122 > [EMAIL PROTECTED] > www.rcom-ne.com > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt > Sent: Monday, September 29, 2003 8:00 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Speed problem > > Agreed. They'd "like" to see 80%, but that's not "real-world" links. I > have some close to 40%, though I don't recommend making it a habit. > > _____ > > Jeremy > > _____ > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Mark Radabaugh > Sent: Monday, September 29, 2003 8:37 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Speed problem > > > ----- Original Message ----- > From: "Kevin Summers" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, September 29, 2003 8:01 PM > Subject: RE: [smartBridges] Speed problem > > > > > > Sounds like you need a bigger antenna on the client end. > > > > 60% RSSI isn't really going to be good enough, and Link > > needs to be in the upper 80s for the link to be usable. > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > > > 60% should be OK - I have good links at 40% RSSI and 75% quality that > work fine. > > Mark > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
