1 11 6
Water Tank
6 11 1
Tegan Snyder
RCOM, L.L.C. - Your Rural Communications Leader
Office: 308-237-7266
Fax: 308-237-5122
[EMAIL PROTECTED]
www.rcom-ne.com
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gino Villarini
Sent: Tuesday, September 30, 2003 5:24 AM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Speed problem
I think your other 5 radios are making too much noise...
how you have your channels and spacing arranged?
Gino
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Tegan Snyder
Sent: Monday, September 29, 2003 11:45 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Speed problem
We are running HPOL.
Tegan Snyder
RCOM, L.L.C. - Your Rural Communications Leader
Office: 308-237-7266
Fax: 308-237-5122
[EMAIL PROTECTED]
www.rcom-ne.com
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno
Sent: Monday, September 29, 2003 10:19 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Speed problem
try a different channel and what Pol are you using H or V pol?
Quoting Tegan Snyder <[EMAIL PROTECTED]>:
> This problem is access point specific.
> We have 6 AP's with 60 degree sectors on a water tower.
>
> One of the AP's is exhibiting the slow down behavior.
> We have using a netgear switch at the water tower.
>
> Currently the backhaul is just an airbridge indoor at the noc
connecting
> to one of the sectors not being used. This is just a temp backhaul
until
> we get our quickbridges in.
>
> This network has no users on it. It is a brand new setup.
>
> Any more ideas? I'm stumped.
>
> Tegan Snyder
> RCOM, L.L.C. - Your Rural Communications Leader
> Office: 308-237-7266
> Fax: 308-237-5122
> [EMAIL PROTECTED]
> www.rcom-ne.com
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless
> Sent: Monday, September 29, 2003 9:04 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] Speed problem
>
> I doubt it.
> ----- Original Message -----
> From: "Tegan Snyder" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, September 29, 2003 6:56 PM
> Subject: RE: [smartBridges] Speed problem
>
>
> Do you think a RTS/CTS Frag setting change would help?
>
> Tegan Snyder
> RCOM, L.L.C. - Your Rural Communications Leader
> Office: 308-237-7266
> Fax: 308-237-5122
> [EMAIL PROTECTED]
> www.rcom-ne.com
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt
> Sent: Monday, September 29, 2003 8:00 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] Speed problem
>
> Agreed. They'd "like" to see 80%, but that's not "real-world" links.
I
> have some close to 40%, though I don't recommend making it a habit.
>
> _____
>
> Jeremy
>
> _____
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> On Behalf Of Mark Radabaugh
> Sent: Monday, September 29, 2003 8:37 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [smartBridges] Speed problem
>
>
> ----- Original Message -----
> From: "Kevin Summers" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, September 29, 2003 8:01 PM
> Subject: RE: [smartBridges] Speed problem
>
>
> >
> > Sounds like you need a bigger antenna on the client end.
> >
> > 60% RSSI isn't really going to be good enough, and Link
> > needs to be in the upper 80s for the link to be usable.
> >
> > Kevin Summers
> > KISTech Internet Services Inc.
> > www.kistech.com
> >
>
> 60% should be OK - I have good links at 40% RSSI and 75% quality that
> work
> fine.
>
> Mark
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges
> <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
Martin Moreno
Blazen Wireless
909-907-4106
www.blazenwireless.com
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
