----- Original Message -----
Sent: Wednesday, October 29, 2003 12:12
AM
Subject: Re: [smartBridges] Slow down
problems
Different SSID no roaming Derek trust me I have
tried EVERY option that you and SB has given me there is nothing that I have
not tried..
It progressively gets worse as I add more
clients.
1. I change the ssid on the APS to something
different and change like 10 or less customers CPE to match and the problem
GOES AWAY!!!!!!!
Tell me that is not an issue with how much
capacity the APPO can handle? I mean it sounds as though you all want to lay
claim just like SB that GEE it cant be their equipment? Have we not all
learned from the past that it has most the time been a issue with the
equipment Just think this stuff is junk when it comes to handling lots of
clients in an area thats congested with other 802.11 traffic and it just plain
and simple cant handle it. I am sure if SB would have taken our suggestions
almost 5 months ago so send someone out to investigate they would learn a
allot of how and what affects their
products!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
----- Original Message -----
Sent: Tuesday, October 28, 2003 10:02
PM
Subject: Re: [smartBridges] Slow down
problems
So, you are using different SSID's? Are
you set for roaming on the clients?
----- Original Message -----
Sent: Tuesday, October 28, 2003 11:35
PM
Subject: Re: [smartBridges] Slow down
problems
No different SSIDS and different channels
ones is on 4 one was on 7 and they have been working fine. They were even
working fine both on chan 3 so channel is NOT the issue. Everyone is
trying to read more into this then what I believe to be the problem LESS
users system is great MORE users system is crap
----- Original Message -----
Sent: Tuesday, October 28, 2003
9:24 PM
Subject: Re: [smartBridges] Slow
down problems
What antennas and channels are you
using? Same SSID's on both AP's?
----- Original Message -----
Sent: Tuesday, October 28, 2003
11:22 PM
Subject: Re: [smartBridges] Slow
down problems
Power is not an issue how can power be an
issue when the power strip is 2 inches away from the radio. The radios
has LMR 400 jumper going to a amp power supply then 50ft of LMR 400
going to the amp at the ant then from the amp to the
ant..
And YES I have tried the system without
any amps and basically I get 1 5 users associated.
----- Original Message -----
Sent: Tuesday, October 28, 2003
8:17 PM
Subject: Re: [smartBridges]
Slow down problems
The toehr thing, as it was mentioned in
a differnet reply earlier, are you using 18VDC power supplies?
Are the AP's lacking the power they need?
----- Original Message -----
Sent: Tuesday, October 28,
2003 5:17 PM
Subject: [smartBridges] Slow
down problems
We give up!
We cant add any more users to our
system total of 60 split between 2 APPO's 30 each at max. We added
2 more today and now we have hardly any users downloading and best
we can do is about 300KBPS down... This SUCKS! is it possibly due
to all the smoke in the air which I would find hard to believe BUT
you never know.
What's the deal with the XO stuff is
it done it sure could be nice to have one to test and see if it is
worth $900.. I am very frustrated at not being able to figure this
out. It all points back to the radios (APPO's) not being able to
process all the associated radios to it? I change the SSID so only
a few people 10-12 can associate to the APPO and there
is NO pro problems. I allow all the users to associate to the APPO
and WHAM crap city throughput goes to hell pings skyrocket just
with one user surfing on and off.. how can this NOT point to the
radios inability to keep up? Why would just idle radios associated
to the APPO have such a bad effect on the APPO?
I have 6 users ready to cancel due to
the crappy service I am getting from these radios I don't
understand how someone else claims 60 plus users on ONE APPO and
they are fine? what speeds are you offering what are your settings
on the APPO and the clients associated to it. What ant are you
using? any amps etc etc..
