----- Original Message -----
Sent: Wednesday, October 29, 2003 12:12
AM
Subject: Re: [smartBridges] Slow down
problems
Different SSID no roaming Derek trust me I have
tried EVERY option that you and SB has given me there is nothing that I have
not tried..
It progressively gets worse as I add more
clients.
1. I change the ssid on the APS to something
different and change like 10 or less customers CPE to match and the problem
GOES AWAY!!!!!!!
Tell me that is not an issue with how much
capacity the APPO can handle? I mean it sounds as though you all want to lay
claim just like SB that GEE it cant be their equipment? Have we not all
learned from the past that it has most the time been a issue with the
equipment Just think this stuff is junk when it comes to handling lots of
clients in an area thats congested with other 802.11 traffic and it just
plain and simple cant handle it. I am sure if SB would have taken our
suggestions almost 5 months ago so send someone out to investigate they
would learn a allot of how and what affects their
products!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
----- Original Message -----
Sent: Tuesday, October 28, 2003 10:02
PM
Subject: Re: [smartBridges] Slow down
problems
So, you are using different SSID's? Are
you set for roaming on the clients?
----- Original Message -----
Sent: Tuesday, October 28, 2003
11:35 PM
Subject: Re: [smartBridges] Slow
down problems
No different SSIDS and different channels
ones is on 4 one was on 7 and they have been working fine. They were
even working fine both on chan 3 so channel is NOT the issue. Everyone
is trying to read more into this then what I believe to be the problem
LESS users system is great MORE users system is crap
----- Original Message -----
Sent: Tuesday, October 28, 2003
9:24 PM
Subject: Re: [smartBridges] Slow
down problems
What antennas and channels are you
using? Same SSID's on both AP's?
----- Original Message -----
Sent: Tuesday, October 28, 2003
11:22 PM
Subject: Re: [smartBridges]
Slow down problems
Power is not an issue how can power be
an issue when the power strip is 2 inches away from the radio. The
radios has LMR 400 jumper going to a amp power supply then 50ft of
LMR 400 going to the amp at the ant then from the amp to the
ant..
And YES I have tried the system without
any amps and basically I get 1 5 users associated.
----- Original Message -----
Sent: Tuesday, October 28,
2003 8:17 PM
Subject: Re: [smartBridges]
Slow down problems
The toehr thing, as it was mentioned
in a differnet reply earlier, are you using 18VDC power
supplies? Are the AP's lacking the power they
need?
----- Original Message -----
Sent: Tuesday, October 28,
2003 5:17 PM
Subject: [smartBridges]
Slow down problems
We give up!
We cant add any more users to our
system total of 60 split between 2 APPO's 30 each at max. We
added 2 more today and now we have hardly any users downloading
and best we can do is about 300KBPS down... This SUCKS! is it
possibly due to all the smoke in the air which I would find hard
to believe BUT you never know.
What's the deal with the XO stuff
is it done it sure could be nice to have one to test and see if
it is worth $900.. I am very frustrated at not being able to
figure this out. It all points back to the radios (APPO's) not
being able to process all the associated radios to it? I change
the SSID so only a few people 10-12 can associate to the
APPO and there is NO pro problems. I allow all the users to
associate to the APPO and WHAM crap city throughput goes to hell
pings skyrocket just with one user surfing on and off.. how can
this NOT point to the radios inability to keep up? Why would
just idle radios associated to the APPO have such a bad effect
on the APPO?
I have 6 users ready to cancel due
to the crappy service I am getting from these radios I don't
understand how someone else claims 60 plus users on ONE APPO and
they are fine? what speeds are you offering what are your
settings on the APPO and the clients associated to it. What ant
are you using? any amps etc etc..
