None of my customers get more than 384k. And that is down only. I think I have one or two that get 384k up, but most are limited to 128k up, 256k down.
On Wed, 29 Oct 2003, Scott Wells wrote: > I really just depends on the bandwidth you are selling. I have 128K up > to 1MB so I have set all of my clients to 11MB with autofallback to 5MB > in case of interference. I have B/W allocated with a Mikrotik box. > > -Scott Wells > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Sam > Sent: Wednesday, October 29, 2003 8:54 AM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Forcing the AP to 2 MB > > > I have a question...after reading a few posts on here, I'm wondering the > > implications of setting my APs to 2 MB, no auto-fallback (or even 1 MB, > no > auto-fallback.) Would this be a good idea? > > By design, none of my customers get more than 384k down, 256k up. And > those are business customers that are mainly all on only during the > daytime. > > Would this be a good idea? Also, I'm assuming that setting the AP to > say, > 1 MB only, that this setting will override the CPE settings because the > AP > will only talk at this speed and no faster? > > I'd appreciate any thoughts on this. > > Thanks! > Sam > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
