RE: [smartBridges] RSSI & Link values

Tue, 11 Nov 2003 21:17:44 -0800

Title: Message
LOS
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carl A Jeptha
Sent: Wednesday, November 12, 2003 2:29 AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] RSSI & Link values

I have 14db1 90* corner and an 24dbi grid.
I am on channel 6 and I do have people I have to talk to (walmart and a company doing a point to point) They are on channel one and 11.
 
Carl
----- Original Message -----
Sent: Tuesday, November 11, 2003 6:25 AM
Subject: RE: [smartBridges] RSSI & Link values

Hi Carl,

 

The low RSSI means, perhaps due to the channel interference. Please select the site survey option from the CPE and see if there is any other AP is running with nearby channels. The RSSI value may affects due to noise (SNR) and interference. This value can be improved by aligning the polarization or directivity of the antenna to reduce the noise level. Sometimes if there is high level of noise from the other transmitters (out of band) nearby the AP or CPE location may lower down the RSSI value of the CPE.

Please let us know what type of antenna you are using on both ends along with the some information regarding the distance between the two links.

 

Thank you

 

Kind regards,

Seeni

sB Tech Support

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Carl A Jeptha
Sent: Tuesday, November 11, 2003 8:33 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] RSSI & Link values

 

My Link value is 85-90%

My Rssi value is 52-55%

Distance is 10 miles.

 

What is the problem????

I am assuming interference.

 

Carl

Reply via email to