What's the vbw of the 14dbi sector ? Could be that you need to adjust the 24dbi grid 
to get in the plane of the vbw.

---------- Original Message ----------------------------------
From: "Carl A Jeptha" <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Date:  Tue, 11 Nov 2003 22:28:43 -0800

>I have 14db1 90* corner and an 24dbi grid.
>I am on channel 6 and I do have people I have to talk to (walmart and a company doing 
>a point to point) They are on channel one and 11.
>
>Carl
>  ----- Original Message ----- 
>  From: Seeni Mohamed 
>  To: [EMAIL PROTECTED] 
>  Sent: Tuesday, November 11, 2003 6:25 AM
>  Subject: RE: [smartBridges] RSSI & Link values
>
>
>  Hi Carl,
>
>
>
>  The low RSSI means, perhaps due to the channel interference. Please select the site 
> survey option from the CPE and see if there is any other AP is running with nearby 
> channels. The RSSI value may affects due to noise (SNR) and interference. This value 
> can be improved by aligning the polarization or directivity of the antenna to reduce 
> the noise level. Sometimes if there is high level of noise from the other 
> transmitters (out of band) nearby the AP or CPE location may lower down the RSSI 
> value of the CPE...
>
>  Please let us know what type of antenna you are using on both ends along with the 
> some information regarding the distance between the two links.
>
>
>
>  Thank you
>
>
>
>  Kind regards,
>
>  Seeni
>
>  sB Tech Support
>
>
>
>  -----Original Message-----
>  From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carl A Jeptha
>  Sent: Tuesday, November 11, 2003 8:33 PM
>  To: [EMAIL PROTECTED]
>  Subject: [smartBridges] RSSI & Link values
>
>
>
>  My Link value is 85-90%
>
>  My Rssi value is 52-55%
>
>  Distance is 10 miles.
>
>
>
>  What is the problem????
>
>  I am assuming interference.
>
>
>
>  Carl
>
>
---
[This E-mail scanned for viruses by Declude Virus By Avolve.net]

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to