I used what scott put out and it work fine for me. ----- Original Message ----- From: "David" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 12, 2003 11:23 AM Subject: RE: [smartBridges] SNMP COMMANDS
> I ried this and kept getting an error. "bad wariable type ( Type of > attribute is Timeticks, not INTEGER) > I figured out that it wanted the description ( Not sure what it is called) > version. > so snmpset -v 1 -m all -c COMMUNITY IPADDRESS > iso.org.dod.internet.private.enterprize.atmel.atmelmib.atmelSys.syscrtlGRP.s > ysReset.0 i 1 > > > -m all had to be used to force it to read all the files in the mib directory > then I had to copy the airbride mibs to the directory modifiying the file to > get rid of some entryies it did not like and I did not need. > > Anyone know how to make it use the numbers rather than look up the numbers? > David > > > > SpeedyQuick Networks, Inc > Boise, Id > www.speedyquick.net > 208.284.5505 > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Scott Brooks > Sent: Tuesday, November 11, 2003 10:41 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] SNMP COMMANDS > > > snmpset -v 1 -c COMMUNITY IP_ADDRESS 1.3.6.1.4.1.410.1.1.1.2.0 i 1 > > That should reboot it for you, where COMMUNITY is your administrator > password for your sb Gear, and IP_ADDRESS is the IP of the device you > want to reboot. > > On Mon, 2003-11-10 at 23:02, David wrote: > > Anyone know how send a snmp set or get command to a smartbridges radio for > > linux. Using perl's net-snmp or snmpset/snmpget or something like that. I > > would like to be able to reset my radios fromt the command line and then > > from a web page so that if need be I can get a ap rebooted remotely from a > > cell phone. > > I know the following > > > > vName: sysReset > > Type: OBJECT-TYPE > > OID: 1.3.6.1.4.1.410.1.1.1.2 > > Max access: read-write > > Value list: 1: enable(1) > > Description: By setting this attribute to enable(1), a reset command to > the > > system is issued. > > > > Any help is appreciated. > > > > > > > > David > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > -- > Scott Brooks > Network Operations Analyst > Binary Solutions Ltd. > [EMAIL PROTECTED] > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
