I ried this and kept getting an error. "bad wariable type ( Type of attribute is Timeticks, not INTEGER) I figured out that it wanted the description ( Not sure what it is called) version. so snmpset -v 1 -m all -c COMMUNITY IPADDRESS iso.org.dod.internet.private.enterprize.atmel.atmelmib.atmelSys.syscrtlGRP.s ysReset.0 i 1
-m all had to be used to force it to read all the files in the mib directory then I had to copy the airbride mibs to the directory modifiying the file to get rid of some entryies it did not like and I did not need. Anyone know how to make it use the numbers rather than look up the numbers? David SpeedyQuick Networks, Inc Boise, Id www.speedyquick.net 208.284.5505 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Scott Brooks Sent: Tuesday, November 11, 2003 10:41 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] SNMP COMMANDS snmpset -v 1 -c COMMUNITY IP_ADDRESS 1.3.6.1.4.1.410.1.1.1.2.0 i 1 That should reboot it for you, where COMMUNITY is your administrator password for your sb Gear, and IP_ADDRESS is the IP of the device you want to reboot. On Mon, 2003-11-10 at 23:02, David wrote: > Anyone know how send a snmp set or get command to a smartbridges radio for > linux. Using perl's net-snmp or snmpset/snmpget or something like that. I > would like to be able to reset my radios fromt the command line and then > from a web page so that if need be I can get a ap rebooted remotely from a > cell phone. > I know the following > > vName: sysReset > Type: OBJECT-TYPE > OID: 1.3.6.1.4.1.410.1.1.1.2 > Max access: read-write > Value list: 1: enable(1) > Description: By setting this attribute to enable(1), a reset command to the > system is issued. > > Any help is appreciated. > > > > David > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org -- Scott Brooks Network Operations Analyst Binary Solutions Ltd. [EMAIL PROTECTED] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
