The "S" stands for "sent". Once the message gets sent sucessfully, the flag is set to "S". If sms delivery reports worked, you would get a "D" for "delivered" (see http://smslib.org/doc/smsserver/interfaces/db/).
On Dec 7, 4:23 pm, benficamania <[EMAIL PROTECTED]> wrote: > Yes, he reaches it... But it's strange that even with the destination > cellphone off, the status in the outbound messages table is set to "S" > > 2008/12/5, Thanasis <[EMAIL PROTECTED]>: > > > > > > > Hi, > > > The compatibility list is just an indication. > > I really cannot say if this is a problem of the M20 terminal. The only > > way to be sure is to find some other model and test that as well. > > > Does the message reach the recipient? > > > On Dec 5, 10:51 am, benficamania <[EMAIL PROTECTED]> wrote: > > > I see this (see File)... Maybe the problem is with the M20 terminal... I > > can > > > send and receive SMS with it, but he's not in the compatibility list... > > > > Thanks > > > > 2008/12/3 Thanasis <[EMAIL PROTECTED]> > > > > > Hi, > > > > > Lets start the easy way, shall we? :) > > > > > Modify the SendMessage example and ask it to provide a status report. > > > > Run it to send the message and leave it running (it will say > > > > "sleeping..." blah blah). At some time after a few minutes you should > > > > see the alert that a new message has been received. Do you see this > > > > behaviour? > > > > > On Dec 3, 4:08 pm, benficamania <[EMAIL PROTECTED]> wrote: > > > > > I'm from Portugal... If I receive a report when using the sim-card in > > a > > > > > normal cellphone, I think I should receive a report using the > > sim-card in > > > > a > > > > > modem... But I'm not sure... I'm gonna try with a sim-card from > > another > > > > > operator... > > > > > > 2008/12/3 Jeff <[EMAIL PROTECTED]> > > > > > > > StatusReports are telco-specific I think. Here in the Philippines > > I > > > > > > never got a status report at all. But I think Thanasis is able to > > get > > > > > > them in Greece. > > > > > > > On Dec 3, 6:51 pm, "[EMAIL PROTECTED]" < > > [EMAIL PROTECTED]> > > > > > > wrote: > > > > > > > I've been trying for the last 10 days to use the Status Reports > > > > > > > functionality, but it doesn't work... I put the message in the > > > > > > > database with the status report field = 1, the SMSServer.conf > > have > > > > the > > > > > > > fields for status reports set to yes, but the Status Report > > doesn´t > > > > > > > work... Even when i turn my cellphone off and try to send a SMS > > to > > > > the > > > > > > > cellphone, using a modem, the status of the output message in the > > > > > > > database is set to "S"... I'm using a M20 terminal... Has anybody > > > > > > > implemented a system with status reports really working? How? > > > > > > > > Thanks...- Hide quoted text - > > > > > > - Show quoted text - > > > > [SMSLib.txt13K ]Output with msg.setStatusReport(true); > > > > Modem Information: > > > Manufacturer: SIEMENS > > > Model: M20 > > > Serial No: 520008411028388 > > > SIM IMSI: ** MASKED ** > > > Signal Level: 87% > > > Battery Level: 100% > > > =============================================================================== > > > << OutboundMessage >> > > > ------------------------------------------------------------------------------- > > > Gateway Id: modem.com1 > > > Encoding: 7-bit > > > Date: Wed Dec 03 21:36:57 GMT 2008 > > > SMSC Ref No: 233 > > > Recipient: +351969343198 > > > Dispatch Date: Wed Dec 03 21:37:01 GMT 2008 > > > Message Status: SENT > > > Validity Period (Hours): -1 > > > Status Report: true > > > Source / Destination Ports: -1 / -1 > > > Flash SMS: false > > > Text: Hello from SMSLib! > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 > > > =============================================================================== > > > > Now Sleeping - Hit <enter> to terminate. > > > > Output with msg.setStatusReport(false) > > > > Modem Information: > > > Manufacturer: SIEMENS > > > Model: M20 > > > Serial No: 520008411028388 > > > SIM IMSI: ** MASKED ** > > > Signal Level: 83% > > > Battery Level: 100% > > > =============================================================================== > > > << OutboundMessage >> > > > ------------------------------------------------------------------------------- > > > Gateway Id: modem.com1 > > > Encoding: 7-bit > > > Date: Wed Dec 03 21:41:49 GMT 2008 > > > SMSC Ref No: 234 > > > Recipient: +351969343198 > > > Dispatch Date: Wed Dec 03 21:41:54 GMT 2008 > > > Message Status: SENT > > > Validity Period (Hours): -1 > > > Status Report: false > > > Source / Destination Ports: -1 / -1 > > > Flash SMS: false > > > Text: Hello from SMSLib! > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 > > > =============================================================================== > > > > Now Sleeping - Hit <enter> to terminate. > > > > DEBUG: > > > > 0 [Thread-1] INFO org.smslib - GTW: modem.com1: Starting gateway, using > > Generic AT Handler. > > > 21 [Thread-1] INFO org.smslib - GTW: modem.com1: Opening: COM1 @9600 > > > 51 [SMSLib-WatchDog] DEBUG org.smslib - WatchDog started. > > > 51 [SMSLib-WatchDog] INFO org.smslib - WatchDog running... > > > 591 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemDriver: > > KeepAlive thread started. > > > 621 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemReader thread > > started. > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: AsyncNotifier thread > > started. > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: AsyncMessageProcessor > > thread started. > > > 641 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() called. > > > 1643 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :(27) > > > 1863 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :+++ > > > 2063 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ > > > 2264 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > called. > > > 3265 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ(cr) > > > 3495 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > 3726 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > called. > > > 4727 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CPIN?(cr) > > > 4877 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPIN: READY > > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPIN: > > READY(cr) > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > 5118 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > called. > > > 6119 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CLIP=1(cr) > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+COPS=0(cr) > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > 7261 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > called. > > > 8262 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CREG?(cr) > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CREG: 0,1 > > > OK > > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CREG: > > 0,1(cr)OK(cr) > > > 8613 [Thread-1] INFO org.smslib - GTW: modem.com1: GSM: Registered to > > home network. > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CMEE=1(cr) > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CPMS?(cr) > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPMS: > > "SM",0,30,"SM",0,30,"SM",0,30 > > > OK > > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPMS: > > "SM",0,30,"SM",0,30,"SM",0,30(cr)OK(cr) > > > 8833 [Thread-1] INFO org.smslib - GTW: modem.com1: MEM: Storage > > Locations Found: SM > > > 8843 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CNMI=?(cr) > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CNMI: > > (0-3),(0-3),(0-2),0,(0-1) > > > OK > > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CNMI: > > (0-3),(0-3),(0-2),0,(0-1)(cr)OK(cr) > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 3 > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 1 > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 > > > 8933 [Thread-1] INFO org.smslib - CNMI: No best match, returning: 0 > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CNMI=3,1,0,0,0(cr) > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CMGF=0(cr) > > > 9053 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > 9053 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > 9064 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SyncMessageProcessor > > thread started. > > > 9074 [Thread-1] INFO org.smslib - GTW: modem.com1: Gateway started. > > > 9104 [SMSLib-QueueManager] INFO org.smslib - GTW: modem.com1: Starting > > Queue Manager. > > > > Modem Information: > > > 10065 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGMI(cr) > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: SIEMENS > > > OK > > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: RECV :SIEMENS(cr)OK(cr) > > > Manufacturer: SIEMENS > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGMM(cr) > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: M20 > > > OK > > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: RECV :M20(cr)OK(cr) > > > Model: M20 > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGSN(cr) > > > 10556 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: > > ... > > read more »- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
