Do you have any other modem or phone that you can test with? It would be nice just to rule out (or not) the possibility that the M20 is the one to blame and not your network.
On Dec 9, 11:21 am, benficamania <[EMAIL PROTECTED]> wrote: > So, there's nothing i can do to get status message? > > 2008/12/7 Thanasis <[EMAIL PROTECTED]> > > > > > > > The "S" stands for "sent". Once the message gets sent sucessfully, the > > flag is set to "S". > > If sms delivery reports worked, you would get a "D" for > > "delivered" (seehttp://smslib.org/doc/smsserver/interfaces/db/). > > > On Dec 7, 4:23 pm, benficamania <[EMAIL PROTECTED]> wrote: > > > Yes, he reaches it... But it's strange that even with the destination > > > cellphone off, the status in the outbound messages table is set to "S" > > > > 2008/12/5, Thanasis <[EMAIL PROTECTED]>: > > > > > Hi, > > > > > The compatibility list is just an indication. > > > > I really cannot say if this is a problem of the M20 terminal. The only > > > > way to be sure is to find some other model and test that as well. > > > > > Does the message reach the recipient? > > > > > On Dec 5, 10:51 am, benficamania <[EMAIL PROTECTED]> wrote: > > > > > I see this (see File)... Maybe the problem is with the M20 > > terminal... I > > > > can > > > > > send and receive SMS with it, but he's not in the compatibility > > list... > > > > > > Thanks > > > > > > 2008/12/3 Thanasis <[EMAIL PROTECTED]> > > > > > > > Hi, > > > > > > > Lets start the easy way, shall we? :) > > > > > > > Modify the SendMessage example and ask it to provide a status > > report. > > > > > > Run it to send the message and leave it running (it will say > > > > > > "sleeping..." blah blah). At some time after a few minutes you > > should > > > > > > see the alert that a new message has been received. Do you see this > > > > > > behaviour? > > > > > > > On Dec 3, 4:08 pm, benficamania <[EMAIL PROTECTED]> wrote: > > > > > > > I'm from Portugal... If I receive a report when using the > > sim-card in > > > > a > > > > > > > normal cellphone, I think I should receive a report using the > > > > sim-card in > > > > > > a > > > > > > > modem... But I'm not sure... I'm gonna try with a sim-card from > > > > another > > > > > > > operator... > > > > > > > > 2008/12/3 Jeff <[EMAIL PROTECTED]> > > > > > > > > > StatusReports are telco-specific I think. Here in the > > Philippines > > > > I > > > > > > > > never got a status report at all. But I think Thanasis is able > > to > > > > get > > > > > > > > them in Greece. > > > > > > > > > On Dec 3, 6:51 pm, "[EMAIL PROTECTED]" < > > > > [EMAIL PROTECTED]> > > > > > > > > wrote: > > > > > > > > > I've been trying for the last 10 days to use the Status > > Reports > > > > > > > > > functionality, but it doesn't work... I put the message in > > the > > > > > > > > > database with the status report field = 1, the SMSServer.conf > > > > have > > > > > > the > > > > > > > > > fields for status reports set to yes, but the Status Report > > > > doesn´t > > > > > > > > > work... Even when i turn my cellphone off and try to send a > > SMS > > > > to > > > > > > the > > > > > > > > > cellphone, using a modem, the status of the output message in > > the > > > > > > > > > database is set to "S"... I'm using a M20 terminal... Has > > anybody > > > > > > > > > implemented a system with status reports really working? How? > > > > > > > > > > Thanks...- Hide quoted text - > > > > > > > > - Show quoted text - > > > > > > [SMSLib.txt13K ]Output with msg.setStatusReport(true); > > > > > > Modem Information: > > > > > Manufacturer: SIEMENS > > > > > Model: M20 > > > > > Serial No: 520008411028388 > > > > > SIM IMSI: ** MASKED ** > > > > > Signal Level: 87% > > > > > Battery Level: 100% > > > =============================================================================== > > > > > << OutboundMessage >> > > > ------------------------------------------------------------------------------- > > > > > Gateway Id: modem.com1 > > > > > Encoding: 7-bit > > > > > Date: Wed Dec 03 21:36:57 GMT 2008 > > > > > SMSC Ref No: 233 > > > > > Recipient: +351969343198 > > > > > Dispatch Date: Wed Dec 03 21:37:01 GMT 2008 > > > > > Message Status: SENT > > > > > Validity Period (Hours): -1 > > > > > Status Report: true > > > > > Source / Destination Ports: -1 / -1 > > > > > Flash SMS: false > > > > > Text: Hello from SMSLib! > > > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 > > > =============================================================================== > > > > > > Now Sleeping - Hit <enter> to terminate. > > > > > > Output with msg.setStatusReport(false) > > > > > > Modem Information: > > > > > Manufacturer: SIEMENS > > > > > Model: M20 > > > > > Serial No: 520008411028388 > > > > > SIM IMSI: ** MASKED ** > > > > > Signal Level: 83% > > > > > Battery Level: 100% > > > =============================================================================== > > > > > << OutboundMessage >> > > > ------------------------------------------------------------------------------- > > > > > Gateway Id: modem.com1 > > > > > Encoding: 7-bit > > > > > Date: Wed Dec 03 21:41:49 GMT 2008 > > > > > SMSC Ref No: 234 > > > > > Recipient: +351969343198 > > > > > Dispatch Date: Wed Dec 03 21:41:54 GMT 2008 > > > > > Message Status: SENT > > > > > Validity Period (Hours): -1 > > > > > Status Report: false > > > > > Source / Destination Ports: -1 / -1 > > > > > Flash SMS: false > > > > > Text: Hello from SMSLib! > > > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 > > > =============================================================================== > > > > > > Now Sleeping - Hit <enter> to terminate. > > > > > > DEBUG: > > > > > > 0 [Thread-1] INFO org.smslib - GTW: modem.com1: Starting gateway, > > using > > > > Generic AT Handler. > > > > > 21 [Thread-1] INFO org.smslib - GTW: modem.com1: Opening: COM1 @9600 > > > > > 51 [SMSLib-WatchDog] DEBUG org.smslib - WatchDog started. > > > > > 51 [SMSLib-WatchDog] INFO org.smslib - WatchDog running... > > > > > 591 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemDriver: > > > > KeepAlive thread started. > > > > > 621 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemReader > > thread > > > > started. > > > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: AsyncNotifier > > thread > > > > started. > > > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: > > AsyncMessageProcessor > > > > thread started. > > > > > 641 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > called. > > > > > 1643 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :(27) > > > > > 1863 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :+++ > > > > > 2063 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ > > > > > 2264 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > > > called. > > > > > 3265 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ(cr) > > > > > 3495 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > > > 3726 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > > > called. > > > > > 4727 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CPIN?(cr) > > > > > 4877 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPIN: > > READY > > > > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPIN: > > > > READY(cr) > > > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > > > 5118 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > > > called. > > > > > 6119 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CLIP=1(cr) > > > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+COPS=0(cr) > > > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) > > > > > 7261 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() > > > > called. > > > > > 8262 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CREG?(cr) > > > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CREG: > > 0,1 > > > > > OK > > > > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CREG: > > > > 0,1(cr)OK(cr) > > > > > 8613 [Thread-1] INFO org.smslib - GTW: modem.com1: GSM: Registered > > to > > > > home network. > > > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CMEE=1(cr) > > > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) > > > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CPMS?(cr) > > > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPMS: > > > > "SM",0,30,"SM",0,30,"SM",0,30 > > > > > OK > > > > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPMS: > > > > "SM",0,30,"SM",0,30,"SM",0,30(cr)OK(cr) > > > > > 8833 [Thread-1] INFO org.smslib - GTW: modem.com1: MEM: Storage > > > > Locations Found: SM > > > > > 8843 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > :AT+CNMI=?(cr) > > > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CNMI: > > > > (0-3),(0-3),(0-2),0,(0-1) > > > > > OK > > > > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CNMI: > > > > (0-3),(0-3),(0-2),0,(0-1)(cr)OK(cr) > > > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 3 > > > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 1 > > > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 > > > > > 8933 [Thread-1] INFO org.smslib - CNMI: No best match, returning: 0 > > > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 > > > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND > > > > :AT+CNMI=3,1,0,0,0(cr) > > > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK > > > > > > 9003 [Thread-1] DEBUG org.smslib > > ... > > read more »- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
