Just wanna make it clear: - If you want to get status for sent SMS: check for "S" status - If you want to get status for delivered SMS: check for "D" status
Maybe like that. Best Regards, Aryo Sanjaya On Tue, Dec 9, 2008 at 16:21, benficamania <[EMAIL PROTECTED]> wrote: > So, there's nothing i can do to get status message? > > 2008/12/7 Thanasis <[EMAIL PROTECTED]> > > >> The "S" stands for "sent". Once the message gets sent sucessfully, the >> flag is set to "S". >> If sms delivery reports worked, you would get a "D" for >> "delivered" (see http://smslib.org/doc/smsserver/interfaces/db/). >> >> On Dec 7, 4:23 pm, benficamania <[EMAIL PROTECTED]> wrote: >> > Yes, he reaches it... But it's strange that even with the destination >> > cellphone off, the status in the outbound messages table is set to "S" >> > >> > 2008/12/5, Thanasis <[EMAIL PROTECTED]>: >> > >> > >> > >> > >> > >> > > Hi, >> > >> > > The compatibility list is just an indication. >> > > I really cannot say if this is a problem of the M20 terminal. The only >> > > way to be sure is to find some other model and test that as well. >> > >> > > Does the message reach the recipient? >> > >> > > On Dec 5, 10:51 am, benficamania <[EMAIL PROTECTED]> wrote: >> > > > I see this (see File)... Maybe the problem is with the M20 >> terminal... I >> > > can >> > > > send and receive SMS with it, but he's not in the compatibility >> list... >> > >> > > > Thanks >> > >> > > > 2008/12/3 Thanasis <[EMAIL PROTECTED]> >> > >> > > > > Hi, >> > >> > > > > Lets start the easy way, shall we? :) >> > >> > > > > Modify the SendMessage example and ask it to provide a status >> report. >> > > > > Run it to send the message and leave it running (it will say >> > > > > "sleeping..." blah blah). At some time after a few minutes you >> should >> > > > > see the alert that a new message has been received. Do you see >> this >> > > > > behaviour? >> > >> > > > > On Dec 3, 4:08 pm, benficamania <[EMAIL PROTECTED]> wrote: >> > > > > > I'm from Portugal... If I receive a report when using the >> sim-card in >> > > a >> > > > > > normal cellphone, I think I should receive a report using the >> > > sim-card in >> > > > > a >> > > > > > modem... But I'm not sure... I'm gonna try with a sim-card from >> > > another >> > > > > > operator... >> > >> > > > > > 2008/12/3 Jeff <[EMAIL PROTECTED]> >> > >> > > > > > > StatusReports are telco-specific I think. Here in the >> Philippines >> > > I >> > > > > > > never got a status report at all. But I think Thanasis is >> able to >> > > get >> > > > > > > them in Greece. >> > >> > > > > > > On Dec 3, 6:51 pm, "[EMAIL PROTECTED]" < >> > > [EMAIL PROTECTED]> >> > > > > > > wrote: >> > > > > > > > I've been trying for the last 10 days to use the Status >> Reports >> > > > > > > > functionality, but it doesn't work... I put the message in >> the >> > > > > > > > database with the status report field = 1, the >> SMSServer.conf >> > > have >> > > > > the >> > > > > > > > fields for status reports set to yes, but the Status Report >> > > doesn´t >> > > > > > > > work... Even when i turn my cellphone off and try to send a >> SMS >> > > to >> > > > > the >> > > > > > > > cellphone, using a modem, the status of the output message >> in the >> > > > > > > > database is set to "S"... I'm using a M20 terminal... Has >> anybody >> > > > > > > > implemented a system with status reports really working? >> How? >> > >> > > > > > > > Thanks...- Hide quoted text - >> > >> > > > > > - Show quoted text - >> > >> > > > [SMSLib.txt13K ]Output with msg.setStatusReport(true); >> > >> > > > Modem Information: >> > > > Manufacturer: SIEMENS >> > > > Model: M20 >> > > > Serial No: 520008411028388 >> > > > SIM IMSI: ** MASKED ** >> > > > Signal Level: 87% >> > > > Battery Level: 100% >> > >> > > >> =============================================================================== >> > > > << OutboundMessage >> >> > >> > > >> ------------------------------------------------------------------------------- >> > > > Gateway Id: modem.com1 >> > > > Encoding: 7-bit >> > > > Date: Wed Dec 03 21:36:57 GMT 2008 >> > > > SMSC Ref No: 233 >> > > > Recipient: +351969343198 >> > > > Dispatch Date: Wed Dec 03 21:37:01 GMT 2008 >> > > > Message Status: SENT >> > > > Validity Period (Hours): -1 >> > > > Status Report: true >> > > > Source / Destination Ports: -1 / -1 >> > > > Flash SMS: false >> > > > Text: Hello from SMSLib! >> > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 >> > >> > > >> =============================================================================== >> > >> > > > Now Sleeping - Hit <enter> to terminate. >> > >> > > > Output with msg.setStatusReport(false) >> > >> > > > Modem Information: >> > > > Manufacturer: SIEMENS >> > > > Model: M20 >> > > > Serial No: 520008411028388 >> > > > SIM IMSI: ** MASKED ** >> > > > Signal Level: 83% >> > > > Battery Level: 100% >> > >> > > >> =============================================================================== >> > > > << OutboundMessage >> >> > >> > > >> ------------------------------------------------------------------------------- >> > > > Gateway Id: modem.com1 >> > > > Encoding: 7-bit >> > > > Date: Wed Dec 03 21:41:49 GMT 2008 >> > > > SMSC Ref No: 234 >> > > > Recipient: +351969343198 >> > > > Dispatch Date: Wed Dec 03 21:41:54 GMT 2008 >> > > > Message Status: SENT >> > > > Validity Period (Hours): -1 >> > > > Status Report: false >> > > > Source / Destination Ports: -1 / -1 >> > > > Flash SMS: false >> > > > Text: Hello from SMSLib! >> > > > PDU data: C8329BFD0699E5EF3668DA9C32D3E210 >> > >> > > >> =============================================================================== >> > >> > > > Now Sleeping - Hit <enter> to terminate. >> > >> > > > DEBUG: >> > >> > > > 0 [Thread-1] INFO org.smslib - GTW: modem.com1: Starting gateway, >> using >> > > Generic AT Handler. >> > > > 21 [Thread-1] INFO org.smslib - GTW: modem.com1: Opening: COM1 >> @9600 >> > > > 51 [SMSLib-WatchDog] DEBUG org.smslib - WatchDog started. >> > > > 51 [SMSLib-WatchDog] INFO org.smslib - WatchDog running... >> > > > 591 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemDriver: >> > > KeepAlive thread started. >> > > > 621 [Thread-1] DEBUG org.smslib - GTW: modem.com1: ModemReader >> thread >> > > started. >> > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: AsyncNotifier >> thread >> > > started. >> > > > 631 [Thread-1] DEBUG org.smslib - GTW: modem.com1: >> AsyncMessageProcessor >> > > thread started. >> > > > 641 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() >> called. >> > > > 1643 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :(27) >> > > > 1863 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :+++ >> > > > 2063 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ >> > > > 2264 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() >> > > called. >> > > > 3265 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATZ(cr) >> > > > 3495 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) >> > > > 3726 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() >> > > called. >> > > > 4727 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CPIN?(cr) >> > > > 4877 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPIN: >> READY >> > >> > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPIN: >> > > READY(cr) >> > > > 4918 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) >> > > > 5118 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() >> > > called. >> > > > 6119 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CLIP=1(cr) >> > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK >> > >> > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) >> > > > 6630 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+COPS=0(cr) >> > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK >> > >> > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) >> > > > 7061 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND :ATE0(cr) >> > > > 7261 [Thread-1] DEBUG org.smslib - GTW: modem.com1: clearBuffer() >> > > called. >> > > > 8262 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CREG?(cr) >> > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CREG: >> 0,1 >> > > > OK >> > >> > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CREG: >> > > 0,1(cr)OK(cr) >> > > > 8613 [Thread-1] INFO org.smslib - GTW: modem.com1: GSM: Registered >> to >> > > home network. >> > > > 8613 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CMEE=1(cr) >> > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK >> > >> > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) >> > > > 8693 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CPMS?(cr) >> > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CPMS: >> > > "SM",0,30,"SM",0,30,"SM",0,30 >> > > > OK >> > >> > > > 8833 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CPMS: >> > > "SM",0,30,"SM",0,30,"SM",0,30(cr)OK(cr) >> > > > 8833 [Thread-1] INFO org.smslib - GTW: modem.com1: MEM: Storage >> > > Locations Found: SM >> > > > 8843 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CNMI=?(cr) >> > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: +CNMI: >> > > (0-3),(0-3),(0-2),0,(0-1) >> > > > OK >> > >> > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :+CNMI: >> > > (0-3),(0-3),(0-2),0,(0-1)(cr)OK(cr) >> > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 3 >> > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 1 >> > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 >> > > > 8933 [Thread-1] INFO org.smslib - CNMI: No best match, returning: 0 >> > > > 8933 [Thread-1] DEBUG org.smslib - CNMI: Found best match: 0 >> > > > 8933 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> > > :AT+CNMI=3,1,0,0,0(cr) >> > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK >> > >> > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) >> > > > 9003 [Thread-1] DEBUG org.smslib - GTW: modem.com1: SEND >> :AT+CMGF=0(cr) >> > > > 9053 [Thread-1] DEBUG org.smslib - GTW: modem.com1: BUFFER: OK >> > >> > > > 9053 [Thread-1] DEBUG org.smslib - GTW: modem.com1: RECV :OK(cr) >> > > > 9064 [Thread-1] DEBUG org.smslib - GTW: modem.com1: >> SyncMessageProcessor >> > > thread started. >> > > > 9074 [Thread-1] INFO org.smslib - GTW: modem.com1: Gateway started. >> > > > 9104 [SMSLib-QueueManager] INFO org.smslib - GTW: modem.com1: >> Starting >> > > Queue Manager. >> > >> > > > Modem Information: >> > > > 10065 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGMI(cr) >> > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: SIEMENS >> > > > OK >> > >> > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: RECV >> :SIEMENS(cr)OK(cr) >> > > > Manufacturer: SIEMENS >> > > > 10345 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGMM(cr) >> > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: M20 >> > > > OK >> > >> > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: RECV >> :M20(cr)OK(cr) >> > > > Model: M20 >> > > > 10435 [main] DEBUG org.smslib - GTW: modem.com1: SEND :AT+CGSN(cr) >> > > > 10556 [main] DEBUG org.smslib - GTW: modem.com1: BUFFER: >> > >> > ... >> > >> > read more »- Hide quoted text - >> > >> > - Show quoted text - >> >> > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
