Hi Marcos, Would you be able to pass me over the handler code that you wrote, so that I could take a look at it since I am planning I would have to do something similar. The issue is I am not being to communicated with any of my three modems with the ReadMessages or the SendMessage programs. I tried using my Phone Samsung Corby Pro (B5310), A GSM/GPRS modem that I have Proliifc Technologies' PL2303 and had no luck. On reading some of the posts on the mailing list I found out that Wavecom/Sierra Wireless modem work most smoothly with the lib so I went ahead and bought a Wavecom Q2403 but that seems not to be working too.
I am trying to download the AT Command document you have referred to in one of your posts, but the download seems to stopping mid-way everytime, so if you can attache that too or mention another link it would be great. If you want the details of the issues I am facing, you can take a look at the topic "Issues while using SMSlib" posted by me. Here's a link to it: http://groups.google.com/group/smslib/browse_thread/thread/20f5bdf2f6cb10a2 Regards, Alok. On Mon, Oct 24, 2011 at 8:41 PM, Marcos Truchado <[email protected]>wrote: > Hi: > > The way that the Wavecom modem handle the AT commands is almost identical > in in both the old and the new ones. I noticed that a few AT commands were > hanging the modem and you need to do a hard reset to set the modem back to > accept AT commands. To avoid that, I used the official Wavecom specification > sheet to build a new handler to support this functionality, and It is > working and will be part in the future release of SMSLib as far as I know > because a previous discussion I had with T.Delenikas. When?, I don't know. > > Please note that this limitation, according to the official Wavecom spec, > only appears when you use one of the new models via an USB connection. Using > the d-sub 15 pin connection should not end with those issues, therefore my > handler is not required and you can safety use the generic one for Wavecom. > > I was able to use my old motorola L6 with SMSLib in the meantime that I was > trying to get my FXT009 handler to work, and It works fantastic, but the > problem is that this modem was laying in a box for at least 3 years, so I > don't think you can be able of buying a new one. > > As I said, I had a really good experience with Wavecom, the specs are easy > to find, the AT command support list is quite standard and It works, at > least for me, perfect. IMHO this is the way to go. > > Best regards. > > Marcos. > > > On Mon, Oct 24, 2011 at 4:53 PM, [email protected] > <[email protected]>wrote: > >> Dear Marcos, >> >> Thank you for all of the information! >> >> Unfortunately I do not want to use something that is not officially >> supported yet, just in case any issue's arise while using this modem. >> I will definitely keep that model on the list of possibilities once >> the new 3.5.1 SMSLib is released. Do you know when this version may >> be released? >> >> Lastly, are there any other USB Modems that are fully compatible with >> the current version? >> >> Thank you, >> >> Matt >> >> On Oct 24, 8:53 am, Marcos Truchado <[email protected]> wrote: >> > Hi: >> > >> > It is a Sierra wireless FXT009 >> > >> > http://www.sierrawireless.com/Support/Downloads/AirLink/Programmable_. >> .. >> > >> > Currently I'm developing an application using it. With the latest 3.5.1 >> > version of SMSLib this modem is not supported. However I was able to >> create >> > a handler that works perfectly. I contact with T. Delenikas and I sent >> him >> > the full project and he told me that this handler will be included in a >> > future release of SMSLib, so expect it to be soon released, or if you >> are on >> > a hurry I can send to you a modified version of the 3.5.1 with the >> handler >> > included that supports this modem. The handler I wrote also should be >> > compatible with the FXT002, but I don't have this modem so I can't say. >> > >> > Best regards. >> > >> > Marcos. >> > >> > On Mon, Oct 24, 2011 at 2:48 PM, [email protected] < >> [email protected]>wrote: >> > >> > >> > >> > >> > >> > >> > >> > > Hello Marcos, >> > >> > > Thank you for the information, which model modem did you purchase? >> > > And was it a Wavecom modem or a Sierra Wireless model modem? >> > >> > > Thanks again, >> > >> > > Matt >> > >> > > On Oct 19, 3:29 pm, Marcos Truchado <[email protected]> >> wrote: >> > > > Hi: >> > >> > > > Go for Wavecom. I had the same problem that you, and finally I >> bought one >> > > > Wavecom (as you said manufactured now by sierra wireless) and It is >> > > working >> > > > perfectly with SMSLib. >> > >> > > > Best regards. >> > >> > > > Marcos. >> > >> > > > On Wed, Oct 19, 2011 at 9:27 PM, [email protected] < >> > > [email protected]>wrote: >> > >> > > > > Hello, >> > >> > > > > Does anyone have a more updated list of USB (not RS232 Serial) GSM >> > > > > Modems that are compatible with SMSLib? >> > >> > > > > The current list, seen here:http://smslib.org/doc/compatibility/, >> is >> > > > > very outdated, for example, I know Wavecom has since been bought >> out >> > > > > by Sierra Wireless, so do any of their USB GSM Modem's work with >> > > > > SMSLib without error's? >> > >> > > > > If no one has an updated list, what would be a good recommended >> USB >> > > > > GSM Modem to use with SMSLib? >> > >> > > > > Thanks in adv. >> > >> > > > > --Matt >> > >> > > > > -- >> > > > > You received this message because you are subscribed to the Google >> > > Groups >> > > > > "SMSLib Discussion Group" group. >> > > > > To post to this group, send email to [email protected]. >> > > > > To unsubscribe from this group, send email to >> > > > > [email protected]. >> > > > > For more options, visit this group at >> > > > >http://groups.google.com/group/smslib?hl=en. >> > >> > > -- >> > > You received this message because you are subscribed to the Google >> Groups >> > > "SMSLib Discussion Group" group. >> > > To post to this group, send email to [email protected]. >> > > To unsubscribe from this group, send email to >> > > [email protected]. >> > > For more options, visit this group at >> > >http://groups.google.com/group/smslib?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "SMSLib Discussion Group" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/smslib?hl=en. >> >> > -- > You received this message because you are subscribed to the Google Groups > "SMSLib Discussion Group" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/smslib?hl=en. > -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
