Hi Marcos, It's great of you to write back, clearing quite a few things. But there's one thing why I found that the document would help me, I have (after trying with my phone and one other modem I have) bought the Wavecom Q2403 (In India we are still to get any of the Sierra Wireless devices) Vendors still have the Wavecom ones. So I thought may be the handler written by you could point me in the right direction. Anyways I will check it in the repo. Also other thing is I won't be going ahead with the writing of the handler, first I am going to spend some time with the source code of smslib to try to figure out where exactly the problem lies, may be after I find the problem I would be in a better position to take a decision of what path to take next.
Thanks and Regards, Alok. On Tue, Oct 25, 2011 at 11:27 AM, Marcos Truchado <[email protected] > wrote: > Hi Alok > > Just the fact that I was able to write a handler for my Wavecom to fix a > few very well documented issues that the new models have with the USB port, > doesn't convert me in an expert on this area. My handler is in fact the old > and well know default handler for Wavecom with a very few modifications that > were causing my modem to hand in certain circumstances when I attached it > with an USB port, and they were even well documented. > > Don't ever waste your time getting the specification that I put in my older > post, It is useless for you. This specification contains the standard AT > commands and the propietary AT commands supported by Wavecom industrial > modems, which doesn't mean that they are supported in your Samsung Corby. > > As a general rule: forget about mobile phones, at least in my experience > they are completely useless, and I don't thing that you are going to be able > to find the documentation for the modem of this phone, and even if you are > able to, It is a lot of work to get it working. Go instead for an industrial > device. > > I did a few tries with a samsung c3300k, and the modem of this phone should > be almost the same as the one as your corby. The result is that in some very > well know, standard and documented AT commands the modem just doesn't > provide any response at all. > > If you are still interested on my handler, as T. Delenikas told in a > previous post, It is already part of the repository. > > Best regards. > > Marcos. > > > On Tue, Oct 25, 2011 at 6:22 AM, alok vaidya <[email protected]> wrote: > >> Hi Marcos, >> >> Would you be able to pass me over the handler code that you wrote, so >> that I could take a look at it since I am planning I would have to do >> something similar. The issue is I am not being to communicated with any of >> my three modems with the ReadMessages or the SendMessage programs. I tried >> using my Phone Samsung Corby Pro (B5310), A GSM/GPRS modem that I have >> Proliifc Technologies' PL2303 and had no luck. On reading some of the posts >> on the mailing list I found out that Wavecom/Sierra Wireless modem work most >> smoothly with the lib so I went ahead and bought a Wavecom Q2403 but that >> seems not to be working too. >> >> I am trying to download the AT Command document you have referred to in >> one of your posts, but the download seems to stopping mid-way everytime, so >> if you can attache that too or mention another link it would be great. >> >> If you want the details of the issues I am facing, you can take a look at >> the topic "Issues while using SMSlib" posted by me. >> Here's a link to it: >> http://groups.google.com/group/smslib/browse_thread/thread/20f5bdf2f6cb10a2 >> >> Regards, >> Alok. >> >> >> On Mon, Oct 24, 2011 at 8:41 PM, Marcos Truchado < >> [email protected]> wrote: >> >>> Hi: >>> >>> The way that the Wavecom modem handle the AT commands is almost identical >>> in in both the old and the new ones. I noticed that a few AT commands were >>> hanging the modem and you need to do a hard reset to set the modem back to >>> accept AT commands. To avoid that, I used the official Wavecom specification >>> sheet to build a new handler to support this functionality, and It is >>> working and will be part in the future release of SMSLib as far as I know >>> because a previous discussion I had with T.Delenikas. When?, I don't know. >>> >>> Please note that this limitation, according to the official Wavecom spec, >>> only appears when you use one of the new models via an USB connection. Using >>> the d-sub 15 pin connection should not end with those issues, therefore my >>> handler is not required and you can safety use the generic one for Wavecom. >>> >>> I was able to use my old motorola L6 with SMSLib in the meantime that I >>> was trying to get my FXT009 handler to work, and It works fantastic, but the >>> problem is that this modem was laying in a box for at least 3 years, so I >>> don't think you can be able of buying a new one. >>> >>> As I said, I had a really good experience with Wavecom, the specs are >>> easy to find, the AT command support list is quite standard and It works, at >>> least for me, perfect. IMHO this is the way to go. >>> >>> Best regards. >>> >>> Marcos. >>> >>> >>> On Mon, Oct 24, 2011 at 4:53 PM, [email protected] < >>> [email protected]> wrote: >>> >>>> Dear Marcos, >>>> >>>> Thank you for all of the information! >>>> >>>> Unfortunately I do not want to use something that is not officially >>>> supported yet, just in case any issue's arise while using this modem. >>>> I will definitely keep that model on the list of possibilities once >>>> the new 3.5.1 SMSLib is released. Do you know when this version may >>>> be released? >>>> >>>> Lastly, are there any other USB Modems that are fully compatible with >>>> the current version? >>>> >>>> Thank you, >>>> >>>> Matt >>>> >>>> On Oct 24, 8:53 am, Marcos Truchado <[email protected]> wrote: >>>> > Hi: >>>> > >>>> > It is a Sierra wireless FXT009 >>>> > >>>> > >>>> http://www.sierrawireless.com/Support/Downloads/AirLink/Programmable_. >>>> .. >>>> > >>>> > Currently I'm developing an application using it. With the latest >>>> 3.5.1 >>>> > version of SMSLib this modem is not supported. However I was able to >>>> create >>>> > a handler that works perfectly. I contact with T. Delenikas and I sent >>>> him >>>> > the full project and he told me that this handler will be included in >>>> a >>>> > future release of SMSLib, so expect it to be soon released, or if you >>>> are on >>>> > a hurry I can send to you a modified version of the 3.5.1 with the >>>> handler >>>> > included that supports this modem. The handler I wrote also should be >>>> > compatible with the FXT002, but I don't have this modem so I can't >>>> say. >>>> > >>>> > Best regards. >>>> > >>>> > Marcos. >>>> > >>>> > On Mon, Oct 24, 2011 at 2:48 PM, [email protected] < >>>> [email protected]>wrote: >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> > > Hello Marcos, >>>> > >>>> > > Thank you for the information, which model modem did you purchase? >>>> > > And was it a Wavecom modem or a Sierra Wireless model modem? >>>> > >>>> > > Thanks again, >>>> > >>>> > > Matt >>>> > >>>> > > On Oct 19, 3:29 pm, Marcos Truchado <[email protected]> >>>> wrote: >>>> > > > Hi: >>>> > >>>> > > > Go for Wavecom. I had the same problem that you, and finally I >>>> bought one >>>> > > > Wavecom (as you said manufactured now by sierra wireless) and It >>>> is >>>> > > working >>>> > > > perfectly with SMSLib. >>>> > >>>> > > > Best regards. >>>> > >>>> > > > Marcos. >>>> > >>>> > > > On Wed, Oct 19, 2011 at 9:27 PM, [email protected] < >>>> > > [email protected]>wrote: >>>> > >>>> > > > > Hello, >>>> > >>>> > > > > Does anyone have a more updated list of USB (not RS232 Serial) >>>> GSM >>>> > > > > Modems that are compatible with SMSLib? >>>> > >>>> > > > > The current list, seen here: >>>> http://smslib.org/doc/compatibility/, is >>>> > > > > very outdated, for example, I know Wavecom has since been bought >>>> out >>>> > > > > by Sierra Wireless, so do any of their USB GSM Modem's work with >>>> > > > > SMSLib without error's? >>>> > >>>> > > > > If no one has an updated list, what would be a good recommended >>>> USB >>>> > > > > GSM Modem to use with SMSLib? >>>> > >>>> > > > > Thanks in adv. >>>> > >>>> > > > > --Matt >>>> > >>>> > > > > -- >>>> > > > > You received this message because you are subscribed to the >>>> Google >>>> > > Groups >>>> > > > > "SMSLib Discussion Group" group. >>>> > > > > To post to this group, send email to [email protected]. >>>> > > > > To unsubscribe from this group, send email to >>>> > > > > [email protected]. >>>> > > > > For more options, visit this group at >>>> > > > >http://groups.google.com/group/smslib?hl=en. >>>> > >>>> > > -- >>>> > > You received this message because you are subscribed to the Google >>>> Groups >>>> > > "SMSLib Discussion Group" group. >>>> > > To post to this group, send email to [email protected]. >>>> > > To unsubscribe from this group, send email to >>>> > > [email protected]. >>>> > > For more options, visit this group at >>>> > >http://groups.google.com/group/smslib?hl=en. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "SMSLib Discussion Group" group. >>>> To post to this group, send email to [email protected]. >>>> To unsubscribe from this group, send email to >>>> [email protected]. >>>> For more options, visit this group at >>>> http://groups.google.com/group/smslib?hl=en. >>>> >>>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "SMSLib Discussion Group" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/smslib?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "SMSLib Discussion Group" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/smslib?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "SMSLib Discussion Group" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/smslib?hl=en. > -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
