HI again Alok I just check that the Q2403 is a RS232 based device, therefore my handler is not suitable for your modem. Go for the standard Wavecom one, I'm 99,9% sure that It will do the job.
Best regards. Marcos. On Tue, Oct 25, 2011 at 10:11 AM, Marcos Truchado <[email protected] > wrote: > Hi Alok > > I would suggest you to try first with the standard Wavecom handler (use > Wavecom as a manufacturer and leave the model blank) to see how It is > working. If it works out of the box, then there is nothing else to do. If it > fails, then, maybe you need an specific handler. > > Best regards. > > Marcos. > > > On Tue, Oct 25, 2011 at 10:06 AM, alok vaidya <[email protected]> wrote: > >> Hi Marcos, >> >> It's great of you to write back, clearing quite a few things. But there's >> one thing why I found that the document would help me, I have (after trying >> with my phone and one other modem I have) bought the Wavecom Q2403 (In India >> we are still to get any of the Sierra Wireless devices) Vendors still have >> the Wavecom ones. So I thought may be the handler written by you could point >> me in the right direction. Anyways I will check it in the repo. Also other >> thing is I won't be going ahead with the writing of the handler, first I am >> going to spend some time with the source code of smslib to try to figure out >> where exactly the problem lies, may be after I find the problem I would be >> in a better position to take a decision of what path to take next. >> >> Thanks and Regards, >> Alok. >> >> >> On Tue, Oct 25, 2011 at 11:27 AM, Marcos Truchado < >> [email protected]> wrote: >> >>> Hi Alok >>> >>> Just the fact that I was able to write a handler for my Wavecom to fix a >>> few very well documented issues that the new models have with the USB port, >>> doesn't convert me in an expert on this area. My handler is in fact the old >>> and well know default handler for Wavecom with a very few modifications that >>> were causing my modem to hand in certain circumstances when I attached it >>> with an USB port, and they were even well documented. >>> >>> Don't ever waste your time getting the specification that I put in my >>> older post, It is useless for you. This specification contains the standard >>> AT commands and the propietary AT commands supported by Wavecom industrial >>> modems, which doesn't mean that they are supported in your Samsung Corby. >>> >>> As a general rule: forget about mobile phones, at least in my experience >>> they are completely useless, and I don't thing that you are going to be able >>> to find the documentation for the modem of this phone, and even if you are >>> able to, It is a lot of work to get it working. Go instead for an industrial >>> device. >>> >>> I did a few tries with a samsung c3300k, and the modem of this phone >>> should be almost the same as the one as your corby. The result is that in >>> some very well know, standard and documented AT commands the modem just >>> doesn't provide any response at all. >>> >>> If you are still interested on my handler, as T. Delenikas told in a >>> previous post, It is already part of the repository. >>> >>> Best regards. >>> >>> Marcos. >>> >>> >>> On Tue, Oct 25, 2011 at 6:22 AM, alok vaidya <[email protected]> wrote: >>> >>>> Hi Marcos, >>>> >>>> Would you be able to pass me over the handler code that you wrote, so >>>> that I could take a look at it since I am planning I would have to do >>>> something similar. The issue is I am not being to communicated with any of >>>> my three modems with the ReadMessages or the SendMessage programs. I tried >>>> using my Phone Samsung Corby Pro (B5310), A GSM/GPRS modem that I have >>>> Proliifc Technologies' PL2303 and had no luck. On reading some of the posts >>>> on the mailing list I found out that Wavecom/Sierra Wireless modem work >>>> most >>>> smoothly with the lib so I went ahead and bought a Wavecom Q2403 but that >>>> seems not to be working too. >>>> >>>> I am trying to download the AT Command document you have referred to in >>>> one of your posts, but the download seems to stopping mid-way everytime, so >>>> if you can attache that too or mention another link it would be great. >>>> >>>> If you want the details of the issues I am facing, you can take a look >>>> at the topic "Issues while using SMSlib" posted by me. >>>> Here's a link to it: >>>> http://groups.google.com/group/smslib/browse_thread/thread/20f5bdf2f6cb10a2 >>>> >>>> Regards, >>>> Alok. >>>> >>>> >>>> On Mon, Oct 24, 2011 at 8:41 PM, Marcos Truchado < >>>> [email protected]> wrote: >>>> >>>>> Hi: >>>>> >>>>> The way that the Wavecom modem handle the AT commands is almost >>>>> identical in in both the old and the new ones. I noticed that a few AT >>>>> commands were hanging the modem and you need to do a hard reset to set the >>>>> modem back to accept AT commands. To avoid that, I used the official >>>>> Wavecom >>>>> specification sheet to build a new handler to support this functionality, >>>>> and It is working and will be part in the future release of SMSLib as far >>>>> as >>>>> I know because a previous discussion I had with T.Delenikas. When?, I >>>>> don't >>>>> know. >>>>> >>>>> Please note that this limitation, according to the official Wavecom >>>>> spec, only appears when you use one of the new models via an USB >>>>> connection. >>>>> Using the d-sub 15 pin connection should not end with those issues, >>>>> therefore my handler is not required and you can safety use the generic >>>>> one >>>>> for Wavecom. >>>>> >>>>> I was able to use my old motorola L6 with SMSLib in the meantime that I >>>>> was trying to get my FXT009 handler to work, and It works fantastic, but >>>>> the >>>>> problem is that this modem was laying in a box for at least 3 years, so I >>>>> don't think you can be able of buying a new one. >>>>> >>>>> As I said, I had a really good experience with Wavecom, the specs are >>>>> easy to find, the AT command support list is quite standard and It works, >>>>> at >>>>> least for me, perfect. IMHO this is the way to go. >>>>> >>>>> Best regards. >>>>> >>>>> Marcos. >>>>> >>>>> >>>>> On Mon, Oct 24, 2011 at 4:53 PM, [email protected] < >>>>> [email protected]> wrote: >>>>> >>>>>> Dear Marcos, >>>>>> >>>>>> Thank you for all of the information! >>>>>> >>>>>> Unfortunately I do not want to use something that is not officially >>>>>> supported yet, just in case any issue's arise while using this modem. >>>>>> I will definitely keep that model on the list of possibilities once >>>>>> the new 3.5.1 SMSLib is released. Do you know when this version may >>>>>> be released? >>>>>> >>>>>> Lastly, are there any other USB Modems that are fully compatible with >>>>>> the current version? >>>>>> >>>>>> Thank you, >>>>>> >>>>>> Matt >>>>>> >>>>>> On Oct 24, 8:53 am, Marcos Truchado <[email protected]> >>>>>> wrote: >>>>>> > Hi: >>>>>> > >>>>>> > It is a Sierra wireless FXT009 >>>>>> > >>>>>> > >>>>>> http://www.sierrawireless.com/Support/Downloads/AirLink/Programmable_. >>>>>> .. >>>>>> > >>>>>> > Currently I'm developing an application using it. With the latest >>>>>> 3.5.1 >>>>>> > version of SMSLib this modem is not supported. However I was able to >>>>>> create >>>>>> > a handler that works perfectly. I contact with T. Delenikas and I >>>>>> sent him >>>>>> > the full project and he told me that this handler will be included >>>>>> in a >>>>>> > future release of SMSLib, so expect it to be soon released, or if >>>>>> you are on >>>>>> > a hurry I can send to you a modified version of the 3.5.1 with the >>>>>> handler >>>>>> > included that supports this modem. The handler I wrote also should >>>>>> be >>>>>> > compatible with the FXT002, but I don't have this modem so I can't >>>>>> say. >>>>>> > >>>>>> > Best regards. >>>>>> > >>>>>> > Marcos. >>>>>> > >>>>>> > On Mon, Oct 24, 2011 at 2:48 PM, [email protected] < >>>>>> [email protected]>wrote: >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> > > Hello Marcos, >>>>>> > >>>>>> > > Thank you for the information, which model modem did you purchase? >>>>>> > > And was it a Wavecom modem or a Sierra Wireless model modem? >>>>>> > >>>>>> > > Thanks again, >>>>>> > >>>>>> > > Matt >>>>>> > >>>>>> > > On Oct 19, 3:29 pm, Marcos Truchado <[email protected]> >>>>>> wrote: >>>>>> > > > Hi: >>>>>> > >>>>>> > > > Go for Wavecom. I had the same problem that you, and finally I >>>>>> bought one >>>>>> > > > Wavecom (as you said manufactured now by sierra wireless) and It >>>>>> is >>>>>> > > working >>>>>> > > > perfectly with SMSLib. >>>>>> > >>>>>> > > > Best regards. >>>>>> > >>>>>> > > > Marcos. >>>>>> > >>>>>> > > > On Wed, Oct 19, 2011 at 9:27 PM, [email protected] < >>>>>> > > [email protected]>wrote: >>>>>> > >>>>>> > > > > Hello, >>>>>> > >>>>>> > > > > Does anyone have a more updated list of USB (not RS232 Serial) >>>>>> GSM >>>>>> > > > > Modems that are compatible with SMSLib? >>>>>> > >>>>>> > > > > The current list, seen here: >>>>>> http://smslib.org/doc/compatibility/, is >>>>>> > > > > very outdated, for example, I know Wavecom has since been >>>>>> bought out >>>>>> > > > > by Sierra Wireless, so do any of their USB GSM Modem's work >>>>>> with >>>>>> > > > > SMSLib without error's? >>>>>> > >>>>>> > > > > If no one has an updated list, what would be a good >>>>>> recommended USB >>>>>> > > > > GSM Modem to use with SMSLib? >>>>>> > >>>>>> > > > > Thanks in adv. >>>>>> > >>>>>> > > > > --Matt >>>>>> > >>>>>> > > > > -- >>>>>> > > > > You received this message because you are subscribed to the >>>>>> Google >>>>>> > > Groups >>>>>> > > > > "SMSLib Discussion Group" group. >>>>>> > > > > To post to this group, send email to [email protected]. >>>>>> > > > > To unsubscribe from this group, send email to >>>>>> > > > > [email protected]. >>>>>> > > > > For more options, visit this group at >>>>>> > > > >http://groups.google.com/group/smslib?hl=en. >>>>>> > >>>>>> > > -- >>>>>> > > You received this message because you are subscribed to the Google >>>>>> Groups >>>>>> > > "SMSLib Discussion Group" group. >>>>>> > > To post to this group, send email to [email protected]. >>>>>> > > To unsubscribe from this group, send email to >>>>>> > > [email protected]. >>>>>> > > For more options, visit this group at >>>>>> > >http://groups.google.com/group/smslib?hl=en. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "SMSLib Discussion Group" group. >>>>>> To post to this group, send email to [email protected]. >>>>>> To unsubscribe from this group, send email to >>>>>> [email protected]. >>>>>> For more options, visit this group at >>>>>> http://groups.google.com/group/smslib?hl=en. >>>>>> >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "SMSLib Discussion Group" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to >>>>> [email protected]. >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/smslib?hl=en. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "SMSLib Discussion Group" group. >>>> To post to this group, send email to [email protected]. >>>> To unsubscribe from this group, send email to >>>> [email protected]. >>>> For more options, visit this group at >>>> http://groups.google.com/group/smslib?hl=en. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "SMSLib Discussion Group" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/smslib?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "SMSLib Discussion Group" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/smslib?hl=en. >> > > -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
