prizmatics would fit our current moldies, they offer no where NEAR the required
current demands due to their internal structure.
I am curious what you feel are the current demands of a typical 6-servo
TD ship.
I can give you some documented loads from other uses.
Raptor 50 heli with 5 mid-sized digital servos in 3D - 2 amps average, 5
amp spikes. (Fromeco has data on their site)
40% IMAC plane w/14 Large digital servos - 3 amp average, 20 amp
instantaneous loads during snap roll series. The EMCOTEC site has this data.
10 large digital servo 38% Extra (mine) - 2.5 amp average current load.
8 large digital servo 33% Edge - 1.5 amp average load.
I have also determined that my 6-mini-digital servo TD ships average
about 350 mA for the load.
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format