The modern digital servos can draw more than 1 amp at stall.

George, you are confusing stalled with fully deflected under load. The JR 368 has a full stall current of 1 or 1.1 amps. Can't pull more than that or it will fry. The flaps are NOT stalled when loaded under full deflection, and certainly NOT under normal launch camber.


As I tried to say in another post, a company that makes a load sharing device flew a 14 LARGE digital servo plane (3 meter Extra with a 150 cc engine on it) they only recorded a 3 amp average load and 1 single 5 millisecond spike of 20 amps during a series of consecutive snap rolls. Now the digitals they used can pull 2.5 amps at full stall so even that 20 amp spike was an average per servo of 1.4 amps. Clearly way less than their fulls stall current. 6 amps on a 6 servo TD ship is TWICE what they measured on the 14 digital Extra .

This is hard data too, so I tend to believe it. If anyone out there has actual in flight recorded data showing me that a full house TC ship with 6 368 servos is pulling 6 amps on launch, I'd love to see it.

RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format

Reply via email to