On 08/11/2011 06:07 PM, Robin Holt wrote:
> Allow the p1010 processor to select the flexcan network driver.
>
> Signed-off-by: Robin Holt <[email protected]>
> Acked-by: Marc Kleine-Budde <[email protected]>,
> Acked-by: Wolfgang Grandegger <[email protected]>,
> Cc: U Bhaskar-B22300 <[email protected]>
> Cc: [email protected],
> Cc: [email protected],
> Cc: PPC list <[email protected]>
> Cc: Kumar Gala <[email protected]>
> ---
> arch/powerpc/boot/dts/p1010rdb.dts | 8 ++++++++
> arch/powerpc/platforms/85xx/Kconfig | 2 ++
> 2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/p1010rdb.dts
> b/arch/powerpc/boot/dts/p1010rdb.dts
> index d6c669c..df89b60 100644
> --- a/arch/powerpc/boot/dts/p1010rdb.dts
> +++ b/arch/powerpc/boot/dts/p1010rdb.dts
> @@ -171,6 +171,14 @@
> };
> };
>
> + can@1c000 {
> + clock-frequency = <0x0bebc1fc>;
> + };
clock-frequency = <200000000>; // filled in by
boot-loader
Is better readable and makes clear that the value is filled in by the
boot loader. Usually we specify "<0>" in that case but it will *not*
work with your board because U-Boot fills into the property "clock_freq"
the CCB-frequency, which is twice as much. This needs to be fixed.
> + can1: can@1d000 {
What is the "can1:" good for?
> + clock-frequency = <0x0bebc1fc>;
See above.
Wolfgang.
> usb@22000 {
> phy_type = "utmi";
> };
> diff --git a/arch/powerpc/platforms/85xx/Kconfig
> b/arch/powerpc/platforms/85xx/Kconfig
> index 498534c..c4304ae 100644
> --- a/arch/powerpc/platforms/85xx/Kconfig
> +++ b/arch/powerpc/platforms/85xx/Kconfig
> @@ -70,6 +70,8 @@ config MPC85xx_RDB
> config P1010_RDB
> bool "Freescale P1010RDB"
> select DEFAULT_UIMAGE
> + select HAVE_CAN_FLEXCAN if NET && CAN
> + select PPC_CLOCK if CAN_FLEXCAN
> help
> This option enables support for the MPC85xx RDB (P1010 RDB) board
>
_______________________________________________
Socketcan-core mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core
