On Thu, Aug 11, 2011 at 06:35:08PM +0200, Wolfgang Grandegger wrote:
> On 08/11/2011 06:07 PM, Robin Holt wrote:
> > Allow the p1010 processor to select the flexcan network driver.
> >
> > Signed-off-by: Robin Holt <[email protected]>
> > Acked-by: Marc Kleine-Budde <[email protected]>,
> > Acked-by: Wolfgang Grandegger <[email protected]>,
> > Cc: U Bhaskar-B22300 <[email protected]>
> > Cc: [email protected],
> > Cc: [email protected],
> > Cc: PPC list <[email protected]>
> > Cc: Kumar Gala <[email protected]>
> > ---
> > arch/powerpc/boot/dts/p1010rdb.dts | 8 ++++++++
> > arch/powerpc/platforms/85xx/Kconfig | 2 ++
> > 2 files changed, 10 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/p1010rdb.dts
> > b/arch/powerpc/boot/dts/p1010rdb.dts
> > index d6c669c..df89b60 100644
> > --- a/arch/powerpc/boot/dts/p1010rdb.dts
> > +++ b/arch/powerpc/boot/dts/p1010rdb.dts
> > @@ -171,6 +171,14 @@
> > };
> > };
> >
> > + can@1c000 {
> > + clock-frequency = <0x0bebc1fc>;
> > + };
>
>
> clock-frequency = <200000000>; // filled in by
> boot-loader
>
> Is better readable and makes clear that the value is filled in by the
> boot loader. Usually we specify "<0>" in that case but it will *not*
> work with your board because U-Boot fills into the property "clock_freq"
> the CCB-frequency, which is twice as much. This needs to be fixed.
I guess the question then is, should I not add the clock-frequency to
this file and let this fall back upon the boot-loader? Until the boot
loader is up-to-speed, my test .dts file will need to define it.
Thanks,
Robin
>
> > + can1: can@1d000 {
>
> What is the "can1:" good for?
>
> > + clock-frequency = <0x0bebc1fc>;
>
> See above.
>
> Wolfgang.
>
>
>
>
> > usb@22000 {
> > phy_type = "utmi";
> > };
> > diff --git a/arch/powerpc/platforms/85xx/Kconfig
> > b/arch/powerpc/platforms/85xx/Kconfig
> > index 498534c..c4304ae 100644
> > --- a/arch/powerpc/platforms/85xx/Kconfig
> > +++ b/arch/powerpc/platforms/85xx/Kconfig
> > @@ -70,6 +70,8 @@ config MPC85xx_RDB
> > config P1010_RDB
> > bool "Freescale P1010RDB"
> > select DEFAULT_UIMAGE
> > + select HAVE_CAN_FLEXCAN if NET && CAN
> > + select PPC_CLOCK if CAN_FLEXCAN
> > help
> > This option enables support for the MPC85xx RDB (P1010 RDB) board
> >
_______________________________________________
Socketcan-core mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/socketcan-core
