> We have a omap (i.e. beagle board) somewhere in our lab, I'll ask the > hardware guy to if he can attach the mcp2515 to it. >
> You mean without the patches mentioned above, I mean the unpachted > 2.6.35.x, your can controller was missing frames? After applying these > patches that problem was fixed? > That is correct. The patch added proper handling of RX1 when there is a rollover from RX0 to RX1. > Can you ensure with a 3rd system, preferred with a different CAN core, > that the frames send to the bus are correct? > I connected a board to a lawicel CAN dongle and receiving on the board (sending from dongle) is fine but sending (with cangen) from the board to the dongle produces repeated frames. > Which driver is active in your setup? Does this happen with both > versions of the driver? > I am currently using the inline driver. I'm going now to bed, but tomorrow I'm going to do some stress tests > with 1 Mbit. > > g'night, > Marc > > -- > Pengutronix e.K. | Marc Kleine-Budde | > Industrial Linux Solutions | Phone: +49-231-2826-924 | > Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de | > > -- Jargalan Nermunkh
_______________________________________________ Socketcan-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/socketcan-users
